Difference between revisions of "Reference Instructions"

From L-Gauge
Jump to navigation Jump to search
 
(136 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
Reference Instruction sheets can be downloaded from the table below.  Instruction sheets are provided in PDF format for convenience and should be able to be viewed on nearly all platforms with a suitable PDF viewer application.
 
Reference Instruction sheets can be downloaded from the table below.  Instruction sheets are provided in PDF format for convenience and should be able to be viewed on nearly all platforms with a suitable PDF viewer application.
  
 +
== Track Components ==
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
 
! scope="col" style="width: 8%;" |Sheet ID
 
! scope="col" style="width: 8%;" |Sheet ID
 
! scope="col" style="width: 20%;" |Preview
 
! scope="col" style="width: 20%;" |Preview
−
! scope="col" style="width: 67%;" |Description
+
! scope="col" style="width: 57%;" |Description
 +
! scope="col" style="width: 5%;" |Pages
 
! scope="col" style="width: 5%;" |Rev
 
! scope="col" style="width: 5%;" |Rev
 +
! scope="col" style="width: 5%;" |Pieces
 
|-
 
|-
 
| rowspan="2" style="text-align: center;" | '''001'''
 
| rowspan="2" style="text-align: center;" | '''001'''
 
| rowspan="2"| [[File:001BallastedStraightPennLUG.png|160px|link=]]
 
| rowspan="2"| [[File:001BallastedStraightPennLUG.png|160px|link=]]
−
| Instructions to ballast a single full straight track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Instructions for the baseplate substrate can be found in reference sheets 002 and 003.  
+
| '''Ballasted Straight Track (PennLUG variation)'''<br/> Instructions to ballast a single full straight track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Instructions for the baseplate substrate can be found in reference sheets 002 and 003.  
 +
| rowspan="2" style="text-align: center;" | 3
 
| rowspan="2" style="text-align: center;" | A
 
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 45
 
|-
 
|-
 
|[http://l-gauge.org/downloads/Ref001BallastStraightPennLUGRevA.pdf  Download Ref Sheet 001 Rev A]
 
|[http://l-gauge.org/downloads/Ref001BallastStraightPennLUGRevA.pdf  Download Ref Sheet 001 Rev A]
Line 22: Line 27:
 
| rowspan="2" style="text-align: center;" | '''002'''
 
| rowspan="2" style="text-align: center;" | '''002'''
 
| rowspan="2" | [[File:002BallastBaseplate1632.png|160px|link=]]
 
| rowspan="2" | [[File:002BallastBaseplate1632.png|160px|link=]]
−
| Instructions to make a substrate for straight ballasted track on a 16x32 baseplate.  The baseplate colour as well as other items can be substituted as desired.
+
| '''Ballasted Straight Track Baseplates (16x32)'''<br/>Instructions to make a substrate for straight ballasted track on a 16x32 baseplate.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 1
 
| rowspan="2" style="text-align: center;" | A
 
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 19
 
|-
 
|-
 
|[http://l-gauge.org/downloads/Ref002BallastStraightBase16x32RevA.pdf  Download Ref Sheet 002 Rev A]
 
|[http://l-gauge.org/downloads/Ref002BallastStraightBase16x32RevA.pdf  Download Ref Sheet 002 Rev A]
Line 29: Line 36:
 
| rowspan="2"  style="text-align: center;" | '''003'''
 
| rowspan="2"  style="text-align: center;" | '''003'''
 
| rowspan="2" | [[File:003BallastBaseplate1616.png|160px|link=]]
 
| rowspan="2" | [[File:003BallastBaseplate1616.png|160px|link=]]
−
| Instructions to make a substrate for straight ballasted track on a 16x16 baseplate.  The baseplate colour as well as other items can be substituted as desired.
+
| '''Ballasted Straight Track Baseplates (16x16)'''<br/> Instructions to make a substrate for straight ballasted track on a 16x16 baseplate.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 1
 
| rowspan="2" style="text-align: center;" | A
 
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 35
 
|-
 
|-
 
|[http://l-gauge.org/downloads/Ref003BallastStraightBase16x16RevA.pdf  Download Ref Sheet 003 Rev A]
 
|[http://l-gauge.org/downloads/Ref003BallastStraightBase16x16RevA.pdf  Download Ref Sheet 003 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''004'''
 +
| rowspan="2" | [[File:004BallastedR40Curve.png|160px|link=]]
 +
|  '''Ballasted R40 Curve Track (PennLUG variation)'''<br/>  Instructions to ballast a single R40 curve track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Instructions for the baseplate substrate can be found in reference sheet 005.
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 62
 +
|-
 +
|[http://l-gauge.org/downloads/Ref004BallastR40CurveRevA.pdf  Download Ref Sheet 004 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''005'''
 +
| rowspan="2" | [[File:005BallastedR40FullCurve.png|160px|link=]]
 +
|  '''Ballasted R40 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R40 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 22
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 245
 +
|-
 +
|[http://l-gauge.org/downloads/Ref005BallastR40CurveBase.pdf  Download Ref Sheet 005 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''006'''
 +
| rowspan="2" | [[File:006BallastedR56Curve.png|160px|link=]]
 +
|  '''Ballasted R56 Curve Track (PennLUG variation)'''<br/>  Instructions to ballast a single ME Models R56 curve track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Ballasting method design contributed by Anthony Sava.
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 70
 +
|-
 +
|[http://l-gauge.org/downloads/Ref006BallastR56CurveRevA.pdf  Download Ref Sheet 006 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''007'''
 +
| rowspan="2" | [[File:007BallastedR72Curve.png|160px|link=]]
 +
|  '''Ballasted R72 Curve Track (PennLUG variation)'''<br/>  Instructions to ballast a single ME Models R72 curve track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Ballasting method design contributed by Anthony Sava.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 86
 +
|-
 +
|[http://l-gauge.org/downloads/Ref007BallastR72CurveRevA.pdf  Download Ref Sheet 007 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''008'''
 +
| rowspan="2" | [[File:008BallastedR88Curve.png|160px|link=]]
 +
|  '''Ballasted R88 Curve Track (PennLUG variation)'''<br/>  Instructions to ballast a single ME Models R88 curve track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Ballasting method design contributed by Anthony Sava.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 66
 +
|-
 +
|[http://l-gauge.org/downloads/Ref008BallastR88CurveRevA.pdf  Download Ref Sheet 008 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''009'''
 +
| rowspan="2" | [[File:009BallastedR104Curve.png|160px|link=]]
 +
|  '''Ballasted R104 Curve Track (PennLUG variation)'''<br/>  Instructions to ballast a single ME Models R104 curve track element using the ballasting style first adopted by PennLUG.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section.  Ballasting method design contributed by Anthony Sava.
 +
| rowspan="2" style="text-align: center;" | 11
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 87
 +
|-
 +
|[http://l-gauge.org/downloads/Ref009BallastR104CurveRevA.pdf  Download Ref Sheet 009 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''010'''
 +
| rowspan="2" | [[File:R56BallastCurve.png|170px|link=]]
 +
|  '''Ballasted R56 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R56 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 21
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 332
 +
|-
 +
|[http://l-gauge.org/downloads/Ref010BallastR56BaseplatesRevA.pdf  Download Ref Sheet 010 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''011'''
 +
| rowspan="2" | [[File:R72BallastCurve.png|180px|link=]]
 +
|  '''Ballasted R72 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R72 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 22
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 428
 +
|-
 +
|[http://l-gauge.org/downloads/Ref011BallastR72BaseplatesRevA.pdf  Download Ref Sheet 011 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''012'''
 +
| rowspan="2" | [[File:R88BallastBase.png|190px|link=]]
 +
|  '''Ballasted R88 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R88 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 25
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 437
 +
|-
 +
|[http://l-gauge.org/downloads/Ref012BallastR88BaseplatesRevA.pdf  Download Ref Sheet 012 Rev A]
 +
|-
 +
| rowspan="4"  style="text-align: center;" | '''013'''
 +
| rowspan="4" | [[File:R104BallastBase.png|200px|link=]]
 +
|  '''Ballasted R104 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R104 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="4" style="text-align: center;" | 9
 +
| rowspan="4" style="text-align: center;" | B
 +
| rowspan="4" style="text-align: center;" | 520
 +
|-
 +
|[http://l-gauge.org/downloads/Ref013BallastR104BaseplatesRevA.pdf  Download Ref Sheet 013 Rev A]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref013BallastR104BaseRevB.pdf  Download Ref Sheet 013 Rev B - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref013BallastR104BaseDarkRevB.pdf  Download Ref Sheet 013 Rev B - Dark Mode]
 +
|-
 +
 +
| rowspan="2"  style="text-align: center;" | '''014'''
 +
| rowspan="2" | [[File:Ref014BallastSwitchLeft.png|190px|link=]]
 +
|  '''Ballasted Left Switch (even ties/sleepers)'''<br/> Instructions to make a ballasted left-hand track switch including the baseplate substrate.  This variation has ties/sleepers located at even stud intervals.  Instructions for odd stud intervals are contained in another reference sheet.  Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 015.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 20
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 277
 +
|-
 +
|[http://l-gauge.org/downloads/Ref014BallastSwitchLeftEvenRevA.pdf  Download Ref Sheet 014 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''015'''
 +
| rowspan="2" | [[File:CompleteLeftSwitchEvenWithReturn.png|190px|link=]]
 +
|  '''Ballasted Left Switch Return Curve'''<br/> Instructions to make a ballasted parallel return curve from a left-hand track switch.  Instructions for the corresponding left switch can be found in sheet 014.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 63
 +
|-
 +
|[http://l-gauge.org/downloads/Ref015BallastedLeftReturnCurveRevA.pdf  Download Ref Sheet 015 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''016'''
 +
| rowspan="2" | [[File:RightSwitchEven.png|190px|link=]]
 +
|  '''Ballasted Right Switch (even ties/sleepers)'''<br/> Instructions to make a ballasted right-hand track switch including the baseplate substrate.  This variation has ties/sleepers located at even stud intervals.  Instructions for odd stud intervals are contained in another reference sheet.  Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 017.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 20
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 278
 +
|-
 +
|[http://l-gauge.org/downloads/Ref016BallastSwitchRightEvenRevA.pdf  Download Ref Sheet 016 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''017'''
 +
| rowspan="2" | [[File:CompleteRightSwitchEvenWithReturn.png|190px|link=]]
 +
|  '''Ballasted Right Switch Return Curve'''<br/> Instructions to make a ballasted parallel return curve from a right-hand track switch.  Instructions for the corresponding left switch can be found in sheet 016.  The baseplate colour as well as other items can be substituted as desired.
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 63
 +
|-
 +
|[http://l-gauge.org/downloads/Ref017BallastRightReturnCurveRevA.pdf  Download Ref Sheet 017 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''018'''
 +
| rowspan="2" | [[File:Ref018Image.png|190px|link=]]
 +
|  '''Ballasted R120 Curve Track (PennLUG variation) *** Deprecated: please see Ref 023 instead ***'''<br/> Instructions to make a baseplate substrate for a quarter circle R120 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired. 
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | B
 +
| rowspan="2" style="text-align: center;" | 110
 +
|-
 +
|[http://l-gauge.org/downloads/Ref018BallastR120CurveRevB.pdf  Download Ref Sheet 018 Rev B]
 +
|-
 +
| rowspan="3"  style="text-align: center;" | '''019'''
 +
| rowspan="3" | [[File: t019BallastedR56Curve.png|200px|link=]]
 +
|  '''Ballasted R56 Curve Track'''<br/>Instructions to ballast a single R56 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BlueBrixx 103352, BrickTracks R56PFDBG8, TrixBrix R56, and Fx Bricks 8856.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 
 +
| rowspan="3" style="text-align: center;" | 8
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 87
 +
|-
 +
|[http://l-gauge.org/downloads/Ref019BallastR56CurveRevA.pdf  Download Ref Sheet 019 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref019BallastR56CurveDarkRevA.pdf  Download Ref Sheet 019 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3"  style="text-align: center;" | '''020'''
 +
| rowspan="3" | [[File: t020BallastedR72Curve.png|200px|link=]]
 +
|  '''Ballasted R72 Curve Track'''<br/> Instructions to ballast a single Fx Bricks brand R72 curve track element (Fx Track product 8872) using the PennLUG ballasting style.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 
 +
| rowspan="3" style="text-align: center;" | 6
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 100
 +
|-
 +
|[http://l-gauge.org/downloads/Ref020BallastR72CurveRevA.pdf  Download Ref Sheet 020 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref020BallastR72CurveDarkRevA.pdf  Download Ref Sheet 020 Rev A - Dark Mode]
 +
|-
 +
| rowspan="3"  style="text-align: center;" | '''021'''
 +
| rowspan="3" | [[File: t021BallastedR88Curve.png|200px|link=]]
 +
|  '''Ballasted R88 Curve Track'''<br/>Instructions to ballast a single R88 curve track element using the PennLUG ballasting style. This ballast method is compatible with: TrixBrix R88, and Fx Bricks 8888.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 
 +
| rowspan="3" style="text-align: center;" | 7
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 57
 +
|-
 +
|[http://l-gauge.org/downloads/Ref021BallastR88CurveRevA.pdf  Download Ref Sheet 021 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref021BallastR88CurveDarkRevA.pdf  Download Ref Sheet 021 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3"  style="text-align: center;" | '''022'''
 +
| rowspan="3" | [[File: t022BallastedR104Curve.png|200px|link=]]
 +
|  '''Ballasted R104 Curve Track'''<br/>Instructions to ballast a single R104 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BrickTracks R104PFDBG8, TrixBrix R104, and Fx Bricks 8904.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 
 +
| rowspan="3" style="text-align: center;" | 6
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 72
 +
|-
 +
|[http://l-gauge.org/downloads/Ref022BallastR104CurveRevA.pdf  Download Ref Sheet 022 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref022BallastR104CurveDarkRevA.pdf  Download Ref Sheet 022 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3"  style="text-align: center;" | '''023'''
 +
| rowspan="3" | [[File: t023BallastedR120Curve.png|200px|link=]]
 +
|  '''Ballasted R120 Curve Track'''<br/> Instructions to ballast a single R120 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BrickTracks R120PFDBG8 and Fx Bricks 8920.  This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 
 +
| rowspan="3" style="text-align: center;" | 7
 +
| rowspan="3" style="text-align: center;" | B
 +
| rowspan="3" style="text-align: center;" | 98
 +
|-
 +
|[http://l-gauge.org/downloads/Ref023BallastR120CurveRevB.pdf  Download Ref Sheet 023 Rev B - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref023BallastR120CurveDarkRevB.pdf  Download Ref Sheet 023 Rev B - Dark Mode]
 +
|-
 +
 +
| rowspan="3"  style="text-align: center;" | '''024'''
 +
| rowspan="3" | [[File: R120BallastedBaseThumb.png|200px|link=]]
 +
|  '''Ballasted R120 Curve Track Baseplates'''<br/>Instructions to make a baseplate substrate for a quarter circle R120 ballasted curve track.  Part quantities can be multiplied as necessary to build a half or full circle.  The baseplate colour as well as other items can be substituted as desired. 
 +
| rowspan="3" style="text-align: center;" | 10
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 586
 +
|-
 +
|[http://l-gauge.org/downloads/Ref024BallastR120BaseRevA.pdf  Download Ref Sheet 024 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref024BallastR120BaseDarkRevA.pdf  Download Ref Sheet 024 Rev A - Dark Mode]
 +
|-
 +
 +
|-
 +
|}
 +
 +
== Bogies / Trucks / Wheels  ==
 +
 +
{| class="wikitable"
 +
|-
 +
! scope="col" style="width: 8%;" |Sheet ID
 +
! scope="col" style="width: 20%;" |Preview
 +
! scope="col" style="width: 57%;" |Description
 +
! scope="col" style="width: 5%;" |Pages
 +
! scope="col" style="width: 5%;" |Rev
 +
! scope="col" style="width: 5%;" |Pieces
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''100'''
 +
| rowspan="2" | [[File:Ref100.png|190px|link=]]
 +
|  '''AAR 50 Ton Freight Truck'''<br/> Instructions to make a North American AAR 50 ton freight truck/bogie.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Cale Leiphart and Dan Aubin for input on this design.
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | D
 +
| rowspan="2" style="text-align: center;" | 51
 +
|-
 +
|[http://l-gauge.org/downloads/Ref100AAR50TonTruckRevD.pdf  Download Ref Sheet 100 Rev D]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''101'''
 +
| rowspan="2" | [[File:Ref101.png|190px|link=]]
 +
|  '''AAR Barber S-2 / ASF A-3 Freight Truck'''<br/> Instructions to make a North American 50 ton Barber S-2 or ASF A-3 freight truck/bogie.  This freight truck depicts the solid axle bearing type with its distinctive journal boxes.  This design of solid axle truck was introduced in the 1940s and were discontinued in 1966.  All solid axle trucks were banned from service in 1980.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Cale Leiphart and Josh Sanders for input on this design.
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 58
 +
|-
 +
|[http://l-gauge.org/downloads/Ref101BarberASFTruckRevA.pdf  Download Ref Sheet 101 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''102'''
 +
| rowspan="2" | [[File:Ref102.png|190px|link=]]
 +
|  '''AAR 70 Ton Roller Bearing Freight Truck'''<br/> Instructions to make a North American 70 ton roller bearing freight truck/bogie.  Since the discontinuation of solid axle trucks starting in 1966, all modern era freight cars use roller bearing axle trucks.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Cale Leiphart and Josh Sanders for input on this design.
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 54
 +
|-
 +
|[http://l-gauge.org/downloads/Ref102RollerBearingTruckRevA.pdf  Download Ref Sheet 102 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''103'''
 +
| rowspan="2" | [[File:Ref103.png|230px|link=]]
 +
|  '''Osgood Bradley Passenger Coach Truck'''<br/> Instructions to make a North American Osgood Bradley lightweight passenger coach truck/bogie.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Matt Csenge and Vinnie Fusca for input on this design.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 73
 +
|-
 +
|[http://l-gauge.org/downloads/Ref103OsgoodBradleyTruckRevA.pdf  Download Ref Sheet 103 Rev A]
 +
|-
 +
| rowspan="2"  style="text-align: center;" | '''104'''
 +
| rowspan="2" | [[File:Ref104.png|230px|link=]]
 +
|  '''3-Axle Heavyweight Passenger Coach Truck'''<br/> Instructions to make a North American 3-axle heavyweight passenger coach truck/bogie.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  The centre axle must have free lateral movement of at least ±2mm in order to negotiate curves and switches.  This can be achieved by cutting the brass axle bearing shorter than the outer fixed axle bearings.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Nate Brill, Matt Csenge and Vinnie Fusca for input on this design.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 61
 +
|-
 +
|[http://l-gauge.org/downloads/Ref104Heavyweight3AxleTruckRevA.pdf  Download Ref Sheet 104 Rev A]
 +
|-
 +
 +
| rowspan="2"  style="text-align: center;" | '''105'''
 +
| rowspan="2" | [[File:Ref105Image.png|220px|link=]]
 +
|  '''Sambre et Meuse European Freight Bogie'''<br/> Instructions to make a European freight bogie manufactured by Sambre et Meuse of France.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Ronald Vallenduuk for this design.
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 54
 +
|-
 +
|[http://l-gauge.org/downloads/Ref105SambreEtMeuseBogieRevA.pdf  Download Ref Sheet 105 Rev A]
 +
|-
 +
 +
| rowspan="2"  style="text-align: center;" | '''106'''
 +
| rowspan="2" | [[File:Ref106Image.png|220px|link=]]
 +
|  '''Minden Deutz MD-36 European Passenger Bogie'''<br/> Instructions to make a MD-36 European passenger bogie manufactured by Minden Deutz.  This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels.  Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821).  The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168).  Credit to Ronald Vallenduuk for this design.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | B
 +
| rowspan="2" style="text-align: center;" | 78
 +
|-
 +
|[http://l-gauge.org/downloads/Ref106MindenDeutz36BogieRevB.pdf  Download Ref Sheet 106 Rev B]
 +
|-
 +
 +
|}
 +
 +
== MILS Train Modules ==
 +
{| class="wikitable"
 +
|-
 +
! scope="col" style="width: 8%;" |Sheet ID
 +
! scope="col" style="width: 20%;" |Preview
 +
! scope="col" style="width: 57%;" |Description
 +
! scope="col" style="width: 5%;" |Pages
 +
! scope="col" style="width: 5%;" |Rev
 +
! scope="col" style="width: 5%;" |Pieces
 +
|-
 +
| rowspan="2" style="text-align: center;" | '''200'''
 +
| rowspan="2"| [[File:Ref200Image.png|160px|link=]]
 +
| '''MILS Basic Terrain Module (BTM) Base for Single Track (16 x 32)'''<br/> Instructions to build a MILS compatible mounting base for ballasted straight single track.  Instructions for the ballasted straight track sections can be found in reference sheet 001.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 100
 +
|-
 +
|[http://l-gauge.org/downloads/Ref200MILSBTMSingleRevA.pdf  Download Ref Sheet 200 Rev A]
 +
|-
 +
| rowspan="2" style="text-align: center;" | '''201'''
 +
| rowspan="2"| [[File:Ref201Image.png|160px|link=]]
 +
| '''MILS Basic Terrain Module (BTM) Base for Double Track (32 x 32)'''<br/> Instructions to build a MILS compatible mounting base for ballasted straight double track.  Instructions for the ballasted straight track sections can be found in reference sheet 001.
 +
| rowspan="2" style="text-align: center;" | 8
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 175
 +
|-
 +
|[http://l-gauge.org/downloads/Ref201MILSBTMDoubleRevA.pdf  Download Ref Sheet 201 Rev A]
 +
|-
 +
| rowspan="2" style="text-align: center;" | '''202'''
 +
| rowspan="2"| [[File:Ref202Image.png|220px|link=]]
 +
| '''MILS Track Elevation Transition Set 3x (16 x 32)'''<br/> Instructions to build a set of 3 modules which act as both a functional and cosmetic transition between a MILS layout domain and a baseplate/tabletop domain.  This transition provides a mounting base for ballasted straight track along a smooth nominal gradient of 1 plate/16 studs.  Instructions for the ballasted straight track sections can be found in reference sheet 001.
 +
| rowspan="2" style="text-align: center;" | 13
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 205
 +
|-
 +
|[http://l-gauge.org/downloads/Ref202MILSTrackTransitionSetRevA.pdf  Download Ref Sheet 202 Rev A]
 +
|-
 +
| rowspan="2" style="text-align: center;" | '''203'''
 +
| rowspan="2"| [[File:Ref203Image.png|180px|link=]]
 +
| '''MILS Single Track Level Crossing (16 x 32)'''<br/> Instructions to build a single track level/grade crossing compatible with the MILS Single Track BTM base module (Ref Sheet 200). 
 +
| rowspan="2" style="text-align: center;" | 8
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 118
 +
|-
 +
|[http://l-gauge.org/downloads/Ref203MILSLevelCrossingSingleRevA.pdf  Download Ref Sheet 203 Rev A]
 +
|-
 +
| rowspan="2" style="text-align: center;" | '''204'''
 +
| rowspan="2"| [[File:Ref204Image.png|180px|link=]]
 +
| '''MILS Double Track Level Crossing (32 x 32)'''<br/> Instructions to build a double track level/grade crossing compatible with the MILS Double Track BTM base module (Ref Sheet 201). 
 +
| rowspan="2" style="text-align: center;" | 14
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 260
 +
|-
 +
|[http://l-gauge.org/downloads/Ref204MILSLevelCrossingDoubleRevA.pdf  Download Ref Sheet 204 Rev A]
 +
|-
 +
|}
 +
 +
== MILS MultiRoad Modules ==
 +
 +
[[File:MultiRoadCatalog3.png|800px|link=]]
 +
 +
{| class="wikitable"
 +
|-
 +
! scope="col" style="width: 8%;" |Sheet ID
 +
! scope="col" style="width: 20%;" |Preview
 +
! scope="col" style="width: 57%;" |Description
 +
! scope="col" style="width: 5%;" |Pages
 +
! scope="col" style="width: 5%;" |Rev
 +
! scope="col" style="width: 5%;" |Pieces
 +
|-
 +
 +
| colspan="6" | '''Road Module Bases'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''300'''
 +
| rowspan="2"| [[File:Ref300Image.png|200px|link=]]
 +
| '''MILS MultiRoad Straight Road BTM Base 32'''<br/> Instructions to build a MILS compatible mounting base for a 32 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM).
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 108
 +
|-
 +
|[http://l-gauge.org/downloads/Ref300MultiRoadStraightBase32RevA.pdf  Download Ref Sheet 300 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''301'''
 +
| rowspan="2"| [[File:Ref301Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Straight Road City Base 32'''<br/> Instructions to build a MILS compatible mounting base for a 32 stud long straight road section with city sidewalks.
 +
| rowspan="2" style="text-align: center;" | 7
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 192
 +
|-
 +
|[http://l-gauge.org/downloads/Ref301MultiRoadStraightCity32RevA.pdf  Download Ref Sheet 301 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''302'''
 +
| rowspan="2"| [[File:Ref302Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Straight Road BTM Base 16'''<br/> Instructions to build a MILS compatible mounting base for a 16 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM).
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 65
 +
|-
 +
|[http://l-gauge.org/downloads/Ref302MultiRoadStraightBTM16RevA.pdf  Download Ref Sheet 302 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''303'''
 +
| rowspan="2"| [[File:Ref303Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Straight Road City Base 16'''<br/> Instructions to build a MILS compatible mounting base for a 16 stud long straight road section with city sidewalks.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 107
 +
|-
 +
|[http://l-gauge.org/downloads/Ref303MultiRoadStraightCityBase16RevA.pdf  Download Ref Sheet 303 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''304'''
 +
| rowspan="2"| [[File:Ref304Image.png| 200px |link=]]
 +
| '''MILS MultiRoad T Junction Road BTM Base'''<br/> Instructions to build a MILS compatible mounting base for a T junction road section compatible with adjacent Basic Terrain Modules (BTM).
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 104
 +
|-
 +
|[http://l-gauge.org/downloads/Ref304MultiRoadJunctionBTMBaseRevA.pdf  Download Ref Sheet 304 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''305'''
 +
| rowspan="2"| [[File:Ref305Image.png| 200px |link=]]
 +
| '''MILS MultiRoad T Junction Road City Base'''<br/> Instructions to build a MILS compatible mounting base for a T junction road section with city sidewalks.
 +
| rowspan="2" style="text-align: center;" | 7
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 154
 +
|-
 +
|[http://l-gauge.org/downloads/Ref305MultiRoadTJunctionCityBaseRevA.pdf  Download Ref Sheet 305 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''306'''
 +
| rowspan="2"| [[File:Ref306Image.png| 200px |link=]]
 +
| '''MILS MultiRoad X Junction Road BTM Base'''<br/> Instructions to build a MILS compatible mounting base for a X junction road section compatible with adjacent Basic Terrain Modules (BTM).
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 100
 +
|-
 +
|[http://l-gauge.org/downloads/Ref306MultiRoadXJunctionBTMBaseRevA.pdf  Download Ref Sheet 306 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''307'''
 +
| rowspan="2"| [[File:Ref307Image.png| 200px |link=]]
 +
| '''MILS MultiRoad X Junction Road City Base'''<br/> Instructions to build a MILS compatible mounting base for a X junction road section with city sidewalks.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 116
 +
|-
 +
|[http://l-gauge.org/downloads/Ref307MultiRoadXJunctionCityBaseRevA.pdf  Download Ref Sheet 307 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''308'''
 +
| rowspan="2"| [[File:Ref308Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Cobblestone Road 32'''<br/> Instructions to build a MILS compatible cobblestone road surface on a specialized 32 x 32 base.  The sidewalks and road dimensions are compatible with MultiRoad City modules.  Thanks to Ludo Soete for contributing these instructions.
 +
| rowspan="2" style="text-align: center;" | 11
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 1317
 +
|-
 +
|[http://l-gauge.org/downloads/Ref308MultiRoadCobbleStone32RevA.pdf  Download Ref Sheet 308 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''309'''
 +
| rowspan="2"| [[File:Ref309Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Modular Building Adapter Base 32'''<br/>Instructions to build a MILS compatible mounting base to seamlessly integrate 32 x 32 LEGO® Modular Buildings into a MILS layout using MultiRoad City bases.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 129
 +
|-
 +
|[http://l-gauge.org/downloads/Ref309MultiRoadModularAdapter32RevA.pdf  Download Ref Sheet 309 Rev A]
 +
|-
 +
 +
| colspan="6" | '''Roadway Lane Modules'''
 +
|-
 +
 +
 +
| rowspan="2" style="text-align: center;" | '''310'''
 +
| rowspan="2"| [[File:Ref310Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Left Lane 32'''<br/> Instructions to build a 32 stud left lane section for a MultiRoad base module.
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 45
 +
|-
 +
|[http://l-gauge.org/downloads/Ref310MultiRoadLeftLane32RevA.pdf  Download Ref Sheet 310 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''311'''
 +
| rowspan="2"| [[File:Ref311Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Right Lane 32'''<br/> Instructions to build a 32 stud right lane section for a MultiRoad base module.
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 37
 +
|-
 +
|[http://l-gauge.org/downloads/Ref311MultiRoadRightLane32RevA.pdf  Download Ref Sheet 311 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''312'''
 +
| rowspan="2"| [[File:Ref312Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Left Lane 16'''<br/> Instructions to build a 16 stud left lane section for a MultiRoad base module.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 26
 +
|-
 +
|[http://l-gauge.org/downloads/Ref312MultiRoadLeftLane16RevA.pdf  Download Ref Sheet 312 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''313'''
 +
| rowspan="2"| [[File:Ref313Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Right Lane 16'''<br/> Instructions to build a 16 stud right lane section for a MultiRoad base module.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 18
 +
|-
 +
|[http://l-gauge.org/downloads/Ref313MultiRoadRightLane16.pdf  Download Ref Sheet 313 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''314'''
 +
| rowspan="2"| [[File:Ref314Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Left Crosswalk 32'''<br/> Instructions to build a 32 stud left lane section which includes a pedestrian crossing for a MultiRoad base module.
 +
| rowspan="2" style="text-align: center;" | 9
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 58
 +
|-
 +
|[http://l-gauge.org/downloads/Ref314MultiRoadLeftCombo32.pdf  Download Ref Sheet 314 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''315'''
 +
| rowspan="2"| [[File:Ref315Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Right Crosswalk 32'''<br/> Instructions to build a 32 stud right lane section which includes a pedestrian crossing for a MultiRoad base module.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 52
 +
|-
 +
|[http://l-gauge.org/downloads/Ref315MultiRoadRightCombo32RevA.pdf  Download Ref Sheet 315 Rev A]
 +
|-
 +
 +
| colspan="6" | '''Roadway Stripes and Markings'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''319'''
 +
| rowspan="2"| [[File:Ref319Image.png| 200px |link=]]
 +
| '''MILS MultiRoad T Junction Crosswalk'''<br/> Instructions to build a T junction road segment with a crosswalk.  This can be used with any of the T and X junction road sections.  This segment mounts to either a left or right lane module in the same way as a line marking section does.
 +
| rowspan="2" style="text-align: center;" | 4
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 72
 +
|-
 +
|[http://l-gauge.org/downloads/Ref319MultiRoadTJunctionCrosswalkRevA.pdf  Download Ref Sheet 319 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''320'''
 +
| rowspan="2"| [[File:Ref320Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Junction Road Segment'''<br/> Instructions to build a junction road segment which can be used with any of the T and X junction road sections.  This segment mounts to either a left or right lane module in the same way as a line marking section does.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 90
 +
|-
 +
|[http://l-gauge.org/downloads/Ref320MultiRoadJunctionSegmentRevA.pdf  Download Ref Sheet 320 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''321'''
 +
| rowspan="2"| [[File:Ref321Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Solid White Line 32'''<br/> Instructions to build a 32 stud solid white line marking which can be mounted to either the left, centre or right lane positions.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 22
 +
|-
 +
|[http://l-gauge.org/downloads/Ref321MultiRoadSolidWhiteStripe32RevA.pdf  Download Ref Sheet 321 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''322'''
 +
| rowspan="2"| [[File:Ref322Image.png|160px|link=]]
 +
| '''MILS MultiRoad Solid White Line 16'''<br/> Instructions to build a 16 stud solid white line marking which can be mounted to either the left, centre or right lane positions.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 12
 +
|-
 +
|[http://l-gauge.org/downloads/Ref322MultiRoadSolidWhiteStripe16RevA.pdf  Download Ref Sheet 322 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''323'''
 +
| rowspan="2"| [[File:Ref323Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Dashed White Line 32'''<br/> Instructions to build a 32 stud dashed white line marking which can be mounted to either the left, centre or right lane positions.
 +
| rowspan="2" style="text-align: center;" | 3
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 27
 +
|-
 +
|[http://l-gauge.org/downloads/Ref323MultiRoadDashedWhiteLine32RevA.pdf  Download Ref Sheet 323 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''324'''
 +
| rowspan="2"| [[File:Ref324Image.png|160px|link=]]
 +
| '''MILS MultiRoad Dashed White Line 16'''<br/> Instructions to build a 16 stud dashed white line marking which can be mounted to either the left, centre or right lane positions.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 15
 +
|-
 +
|[http://l-gauge.org/downloads/Ref324MultiRoadDashedWhiteLine16RevA.pdf  Download Ref Sheet 324 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''325'''
 +
| rowspan="2"| [[File:Ref325Image.png| 200px |link=]]
 +
| '''MILS MultiRoad Double Yellow Line 32'''<br/> Instructions to build a 32 stud double yellow line marking which can be mounted to either the left, centre or right lane positions.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 23
 +
|-
 +
|[http://l-gauge.org/downloads/Ref325MultiRoadSolidDoubleYellow32RevA.pdf  Download Ref Sheet 325 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''326'''
 +
| rowspan="2"| [[File:Ref326Image.png|160px|link=]]
 +
| '''MILS MultiRoad Double Yellow Line 16'''<br/> Instructions to build a 16 stud double yellow line marking which can be mounted to either the left, centre or right lane positions.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 13
 +
|-
 +
|[http://l-gauge.org/downloads/Ref326MultiRoadDoubleYellow16RevA.pdf  Download Ref Sheet 326 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''328'''
 +
| rowspan="2"| [[File:Ref328Image.png|200px|link=]]
 +
| '''MILS MultiRoad X Junction Left Lane'''<br/> Instructions to build the left lane side of a X junction with pedestrian crosswalks on all 4 routes of the junction.  Combine with sheet 329 to make a complete junction.
 +
| rowspan="2" style="text-align: center;" | 11
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 177
 +
|-
 +
|[http://l-gauge.org/downloads/Ref328MultiRoadXJunctionLeftLaneRevA.pdf  Download Ref Sheet 328 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''329'''
 +
| rowspan="2"| [[File:Ref329Image.png|200px|link=]]
 +
| '''MILS MultiRoad X Junction Right Lane'''<br/> Instructions to build the right lane side of a X junction with pedestrian crosswalks on all 4 routes of the junction.  Combine with sheet 328 to make a complete junction.
 +
| rowspan="2" style="text-align: center;" | 8
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 139
 +
|-
 +
|[http://l-gauge.org/downloads/Ref329MultiRoadXJunctionRightLaneRevA.pdf  Download Ref Sheet 329 Rev A]
 +
|-
 +
 +
| colspan="6" | '''Roadway Entrances and Parking'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''330'''
 +
| rowspan="2"| [[File:Ref330Image.png|200px|link=]]
 +
| '''MILS MultiRoad T Laneway Entrance'''<br/> Instructions to build a laneway or driveway entrance off of a main road.  The lane entrance can be used to transition to a parking lot, a driveway to a building or a minor roadway.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="2" style="text-align: center;" | 8
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 213
 +
|-
 +
|[http://l-gauge.org/downloads/Ref330MultiRoadLanewayEntryRevA.pdf  Download Ref Sheet 330 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''331'''
 +
| rowspan="2"| [[File:Ref331Image.png|180px|link=]]
 +
| '''MILS MultiRoad Parking Lot Left Side Markings'''<br/> Instructions to build a modular parking lot section with left hand separator markings.  Combine multiple modules to make a parking lot of a desired size.  This module can be oriented either horizontally or vertically with respect to the entrance to the main road.  Modules can also be stacked for multiple rows or columns within a parking lot.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 208
 +
|-
 +
|[http://l-gauge.org/downloads/Ref331MultiRoadLeftParkingSpaceRevA.pdf  Download Ref Sheet 331 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''332'''
 +
| rowspan="2"| [[File:Ref332Image.png|180px|link=]]
 +
| '''MILS MultiRoad Parking Lot Right Side Markings'''<br/> Instructions to build a modular parking lot section with right hand separator markings.  Combine multiple modules to make a parking lot of a desired size.  This module can be oriented either horizontally or vertically with respect to the entrance to the main road.  Modules can also be stacked for multiple rows or columns within a parking lot.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="2" style="text-align: center;" | 5
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 208
 +
|-
 +
|[http://l-gauge.org/downloads/Ref332MultiRoadRightParkingSpaceRevA.pdf  Download Ref Sheet 332 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''333'''
 +
| rowspan="2"| [[File:Ref333Image.png|180px|link=]]
 +
| '''MILS MultiRoad Parking Lot Left with Disabled Space'''<br/> Instructions to build a modular parking lot section with left hand separator markings and a dedicated space for disabled parking.  Combine multiple modules to make a parking lot of a desired size.  This module can be oriented either horizontally or vertically with respect to the entrance to the main road.  Modules can also be stacked for multiple rows or columns within a parking lot.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="2" style="text-align: center;" | 7
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 220
 +
|-
 +
|[http://l-gauge.org/downloads/Ref333MultiRoadParkingLeftDisabledRevA.pdf  Download Ref Sheet 333 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''334'''
 +
| rowspan="2"| [[File:Ref334Image.png|180px|link=]]
 +
| '''MILS MultiRoad Parking Lot Right with Disabled Space'''<br/> Instructions to build a modular parking lot section with right hand separator markings and a dedicated space for disabled parking.  Combine multiple modules to make a parking lot of a desired size.  This module can be oriented either horizontally or vertically with respect to the entrance to the main road.  Modules can also be stacked for multiple rows or columns within a parking lot.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="2" style="text-align: center;" | 7
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 220
 +
|-
 +
|[http://l-gauge.org/downloads/Ref334MultiRoadParkingRightDisabledRevA.pdf  Download Ref Sheet 334 Rev A]
 +
|-
 +
 +
| colspan="6" | '''Modular Walkway with Decorative Feature Inserts'''
 +
|-
 +
 +
 +
| rowspan="3" style="text-align: center;" | '''335'''
 +
| rowspan="3"| [[File:Ref335Image.png|200px|link=]]
 +
| '''MILS MultiRoad Walkway Base 16x32'''<br/> Instructions to build a modular walkway base section with two open spaces to insert a modular flowerbed, fountain, or other decorative feature.  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 12
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 230
 +
|-
 +
|[http://l-gauge.org/downloads/Ref335MultiRoadWalkwayBaseRevA.pdf  Download Ref Sheet 335 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref335MultiRoadWalkwayBaseDarkRevA.pdf  Download Ref Sheet 335 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3" style="text-align: center;" | '''336'''
 +
| rowspan="3"| [[File:Ref336Image.png|135px|link=]]
 +
| '''MILS MultiRoad Flower Bed Module'''<br/> Instructions to build a modular flower bed module to insert in a walkway base section (335 or 339).  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 2
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 23
 +
|-
 +
|[http://l-gauge.org/downloads/Ref336MultiFlowerBedRevA.pdf  Download Ref Sheet 336 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref336MultiFlowerBedDarkRevA.pdf  Download Ref Sheet 336 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3" style="text-align: center;" | '''337'''
 +
| rowspan="3"| [[File:Ref337Image.png|135px|link=]]
 +
| '''MILS MultiRoad Fountain Module'''<br/> Instructions to build a modular fountain module to insert in a walkway base section (335 or 339).  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 5
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 90
 +
|-
 +
|[http://l-gauge.org/downloads/Ref337MultiFountainRevA.pdf  Download Ref Sheet 337 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref337MultiFountainDarkRevA.pdf  Download Ref Sheet 337 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3" style="text-align: center;" | '''338'''
 +
| rowspan="3"| [[File:Ref338Image.png|135px|link=]]
 +
| '''MILS MultiRoad Tree Bed Module'''<br/> Instructions to build a modular tree bed module to insert in a walkway base section (335 or 339).  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 3
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 34
 +
|-
 +
|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedRevA.pdf  Download Ref Sheet 338 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedDarkRevA.pdf  Download Ref Sheet 338 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3" style="text-align: center;" | '''339'''
 +
| rowspan="3"| [[File:Ref339Image.png|180px|link=]]
 +
| '''MILS MultiRoad Walkway Base 16x16'''<br/> Instructions to build a modular walkway base section with one open space to insert a modular flowerbed, fountain, or other decorative feature.  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 9
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 132
 +
|-
 +
|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedRevA.pdf  Download Ref Sheet 339 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedDarkRevA.pdf  Download Ref Sheet 339 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3" style="text-align: center;" | '''340'''
 +
| rowspan="3"| [[File:Ref340Image.png|135px|link=]]
 +
| '''MILS MultiRoad Walkway Plain Module'''<br/> Instructions to build a plain walkway module to insert in a walkway base section (335 or 339).  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 2
 +
| rowspan="3" style="text-align: center;" | A
 +
| rowspan="3" style="text-align: center;" | 33
 +
|-
 +
|[http://l-gauge.org/downloads/Ref340MultiRoadWalkwayModuleRevA.pdf  Download Ref Sheet 340 Rev A - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref340MultiRoadWalkwayModuleDarkRevA.pdf  Download Ref Sheet 340 Rev A - Dark Mode]
 +
|-
 +
 +
| rowspan="3" style="text-align: center;" | '''341'''
 +
| rowspan="3"| [[File:Ref341Image.png|95px|link=]]
 +
| '''MILS MultiRoad Walkway Statue Module'''<br/> Instructions to build a statue which can be inserted into the tree bed module (338).  Combine multiple modules to make a public space of a desired size.  Instructions generously contributed by Ludo Soete.
 +
| rowspan="3" style="text-align: center;" | 3
 +
| rowspan="3" style="text-align: center;" | B
 +
| rowspan="3" style="text-align: center;" | 46
 +
|-
 +
|[http://l-gauge.org/downloads/Ref341MultiRoadStatueModuleRevB.pdf  Download Ref Sheet 341 Rev B - Light Mode]
 +
|-
 +
|[http://l-gauge.org/downloads/Ref341MultiRoadStatueModuleDarkRevB.pdf  Download Ref Sheet 341 Rev B - Dark Mode]
 +
|-
 +
 +
 +
|}
 +
 +
== ViaTrack System Components ==
 +
 +
[[File:ViaTrackCatalog3.png|900px]]
 +
 +
{| class="wikitable"
 +
|-
 +
! scope="col" style="width: 8%;" |Sheet ID
 +
! scope="col" style="width: 20%;" |Preview
 +
! scope="col" style="width: 57%;" |Description
 +
! scope="col" style="width: 5%;" |Pages
 +
! scope="col" style="width: 5%;" |Rev
 +
! scope="col" style="width: 5%;" |Pieces
 +
|-
 +
 +
| colspan="6" | '''Track Modules'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''410'''
 +
| rowspan="2"| [[File:Ref410Image.png|200px|link=]]
 +
| '''ViaTrack Ballasted Concrete Tie/Sleeper Track'''<br/> Instructions to build a typical ballasted concrete tie/sleeper track section.  This track assembly can be directly mounted to the track frame module Ref 440.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 54
 +
|-
 +
|[http://l-gauge.org/downloads/Ref410ViaTrackBallastedTrackRevA.pdf  Download Ref Sheet 410 Rev A]
 +
|-
 +
 +
 +
| rowspan="2" style="text-align: center;" | '''411'''
 +
| rowspan="2"| [[File:Ref411Image.png|200px|link=]]
 +
| '''ViaTrack Flat Slab Concrete Track'''<br/> Instructions to build a solid slab concrete track assembly.  This assembly is designed to fit the track mounting base Ref 421.  The combined assembly can then be mounted to the track frame module Ref 440.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 37
 +
|-
 +
|[http://l-gauge.org/downloads/Ref411ViaTrackFlatSlabTrackRevA.pdf  Download Ref Sheet 411 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''412'''
 +
| rowspan="2"| [[File:Ref412Image.png|200px|link=]]
 +
| '''ViaTrack Open Slab Concrete Track'''<br/> Instructions to build an open frame slab concrete track assembly.  This assembly is designed to fit the track mounting base Ref 422 or Ref 423.  The combined assembly can then be mounted to the track frame module Ref 440.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 60
 +
|-
 +
|[http://l-gauge.org/downloads/Ref412ViaTrackOpenFrameTrackRevA.pdf  Download Ref Sheet 412 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''421'''
 +
| rowspan="2"| [[File:Ref421Image.png|200px|link=]]
 +
| '''ViaTrack Flat Slab Track Base'''<br/> Instructions to build a mounting base for the flat slab concrete track assembly Ref 411.  The combined assembly can be mounted to the track frame module Ref 440.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 48
 +
|-
 +
|[http://l-gauge.org/downloads/Ref421ViaTrackFlatSlabTrackBaseRevA.pdf  Download Ref Sheet 421 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''422'''
 +
| rowspan="2"| [[File:Ref422Image.png|200px|link=]]
 +
| '''ViaTrack Open Frame Track Base Concrete'''<br/> Instructions to build a mounting base for the open frame concrete track assembly Ref 412.  The combined assembly can be mounted to the track frame module Ref 440.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 53
 +
|-
 +
|[http://l-gauge.org/downloads/Ref422ViaTrackOpenFrameBaseConcreteRevA.pdf  Download Ref Sheet 422 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''423'''
 +
| rowspan="2"| [[File:Ref423Image.png|200px|link=]]
 +
| '''ViaTrack Open Frame Track Base Ballasted'''<br/> Instructions to build a mounting base for the open frame concrete track assembly Ref 412.  The combined assembly can be mounted to the track frame module Ref 440.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 53
 +
|-
 +
|[http://l-gauge.org/downloads/Ref423ViaTrackOpenFrameBaseBallastRevA.pdf  Download Ref Sheet 423 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''440'''
 +
| rowspan="2"| [[File:Ref440ImageB.png|200px|link=]]
 +
| '''ViaTrack Mounting Frame for Double Track'''<br/> Instructions to build a mounting frame which is used to support track sections, cosmetic track borders and clip-in wall sections.  The mounting frame can be freely mounted to a supporting viaduct structure below.
 +
| rowspan="2" style="text-align: center;" | 6
 +
| rowspan="2" style="text-align: center;" | B
 +
| rowspan="2" style="text-align: center;" | 178
 +
|-
 +
|[http://l-gauge.org/downloads/Ref440ViaTrackTrackFrameRevB.pdf  Download Ref Sheet 440 Rev B]
 +
|-
 +
 +
| colspan="6" | '''Track Border Panels'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''450'''
 +
| rowspan="2"| [[File:Ref450Image.png|200px|link=]]
 +
| '''ViaTrack Concrete Track Border'''<br/> Instructions to build a concrete track border panel (3 x 32).
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 24
 +
|-
 +
|[http://l-gauge.org/downloads/Ref450ViaTrackConcreteTrackBorderRevA.pdf  Download Ref Sheet 450 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''451'''
 +
| rowspan="2"| [[File:Ref451Image.png|200px|link=]]
 +
| '''ViaTrack Concrete Track Centre'''<br/> Instructions to build a centre concrete track border panel (8 x 16).
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 13
 +
|-
 +
|[http://l-gauge.org/downloads/Ref451ViaTrackConcreteTrackCentreRevA.pdf  Download Ref Sheet 451 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''452'''
 +
| rowspan="2"| [[File:Ref452Image.png|200px|link=]]
 +
| '''ViaTrack Ballast Track Border'''<br/> Instructions to build a ballasted track border panel (3 x 32).
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 23
 +
|-
 +
|[http://l-gauge.org/downloads/Ref452ViaTrackBallastTrackBorderRevA.pdf  Download Ref Sheet 452 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''453'''
 +
| rowspan="2"| [[File:Ref453Image.png|200px|link=]]
 +
| '''ViaTrack Ballasted Track Centre'''<br/> Instructions to build a centre ballasted track border panel (8 x 16).
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 14
 +
|-
 +
|[http://l-gauge.org/downloads/Ref453ViaTrackBallastCentreRevA.pdf  Download Ref Sheet 453 Rev A]
 +
|-
 +
 +
| colspan="6" | '''Clip-in Cosmetic Wall Modules'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''460'''
 +
| rowspan="2"| [[File:Ref460Image.png|200px|link=]]
 +
| '''ViaTrack Concrete Panelled Wall Section'''<br/> Instructions to build a concrete panelled wall section.  This wall assembly can be clipped to either side of the track frame Ref 440 assembly.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 33
 +
|-
 +
|[http://l-gauge.org/downloads/Ref460ViaTrackConcretePanelWallRevA.pdf  Download Ref Sheet 460 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''461'''
 +
| rowspan="2"| [[File:Ref461Image.png|200px|link=]]
 +
| '''ViaTrack Open Girder Wall Section'''<br/> Instructions to build a open girder wall section.  This wall assembly can be clipped to either side of the track frame Ref 440 assembly.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 23
 +
|-
 +
|[http://l-gauge.org/downloads/Ref461ViaTrackOpenGirderWallRevA.pdf  Download Ref Sheet 461 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''463'''
 +
| rowspan="2"| [[File:Ref463Image.png|200px|link=]]
 +
| '''ViaTrack Girder Bridge Sides'''<br/> Instructions to build cosmetic girder bridge side walls designed to clip to either side of the track frame Ref 440 assembly.  This bridge assembly can be customized by building in different colours or by substituting or removing the hazard strip.
 +
| rowspan="2" style="text-align: center;" | 13
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 170
 +
|-
 +
|[http://l-gauge.org/downloads/Ref463ViaTrackGirderBridgeSideRevA.pdf  Download Ref Sheet 463 Rev A]
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''464'''
 +
| rowspan="2"| [[File:Ref464Image.png|200px|link=]]
 +
| '''ViaTrack Short Concrete Panelled Wall Section'''<br/> Instructions to build a short concrete panelled wall section.  This wall assembly can be clipped to either side of the track frame Ref 440 assembly.
 +
| rowspan="2" style="text-align: center;" | 2
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 28
 +
|-
 +
|[http://l-gauge.org/downloads/Ref464ViaTrackShortConcretePanelWallRevA.pdf  Download Ref Sheet 464 Rev A]
 +
|-
 +
 +
| colspan="6" | '''Viaduct Structures'''
 +
|-
 +
 +
| rowspan="2" style="text-align: center;" | '''470'''
 +
| rowspan="2"| [[File:Ref470Image.png|200px|link=]]
 +
| '''ViaTrack Poured Concrete Viaduct'''<br/> Instructions to build a poured concrete viaduct pier.  This viaduct section is designed to support a track mounting frame above. 
 +
| rowspan="2" style="text-align: center;" | 12
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 316
 +
|-
 +
|[http://l-gauge.org/downloads/Ref470ViaTrackPouredConcreteViaductRevA.pdf  Download Ref Sheet 470 Rev A]
 +
|-
 +
 +
 +
| rowspan="2" style="text-align: center;" | '''471'''
 +
| rowspan="2"| [[File:Ref471Image.png|200px|link=]]
 +
| '''ViaTrack Precast Concrete Viaduct'''<br/> Instructions to build a typical open-frame pre-cast concrete viaduct.  This viaduct section is designed to support a track mounting frame above.  The side facing 2x2 tile elements can be removed to add trackside accessories such as overhead line gantries, signals, lights, signs, etc.
 +
| rowspan="2" style="text-align: center;" | 16
 +
| rowspan="2" style="text-align: center;" | A
 +
| rowspan="2" style="text-align: center;" | 346
 +
|-
 +
|[http://l-gauge.org/downloads/Ref471ViaTrackPrecastConcreteViaductRevA.pdf  Download Ref Sheet 471 Rev A]
 
|-
 
|-
 
|}
 
|}
 +
 +
 +
[[Category:Resources]]
 +
[[Category:Instuctions]]

Latest revision as of 18:45, 3 October 2022

Sample Reference Instruction Sheets
Ref001CoverPage.png Ref001Page2.png Ref001Page3.png

Reference Instruction sheets can be downloaded from the table below. Instruction sheets are provided in PDF format for convenience and should be able to be viewed on nearly all platforms with a suitable PDF viewer application.

Track Components

Sheet ID Preview Description Pages Rev Pieces
001 001BallastedStraightPennLUG.png Ballasted Straight Track (PennLUG variation)
Instructions to ballast a single full straight track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Instructions for the baseplate substrate can be found in reference sheets 002 and 003. 		3 A 45
Download Ref Sheet 001 Rev A
002 002BallastBaseplate1632.png Ballasted Straight Track Baseplates (16x32)
Instructions to make a substrate for straight ballasted track on a 16x32 baseplate. The baseplate colour as well as other items can be substituted as desired. 		1 A 19
Download Ref Sheet 002 Rev A
003 003BallastBaseplate1616.png Ballasted Straight Track Baseplates (16x16)
Instructions to make a substrate for straight ballasted track on a 16x16 baseplate. The baseplate colour as well as other items can be substituted as desired. 		1 A 35
Download Ref Sheet 003 Rev A
004 004BallastedR40Curve.png Ballasted R40 Curve Track (PennLUG variation)
Instructions to ballast a single R40 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Instructions for the baseplate substrate can be found in reference sheet 005. 		4 A 62
Download Ref Sheet 004 Rev A
005 005BallastedR40FullCurve.png Ballasted R40 Curve Track Baseplates
Instructions to make a baseplate substrate for a quarter circle R40 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		22 A 245
Download Ref Sheet 005 Rev A
006 006BallastedR56Curve.png Ballasted R56 Curve Track (PennLUG variation)
Instructions to ballast a single ME Models R56 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava. 		4 A 70
Download Ref Sheet 006 Rev A
007 007BallastedR72Curve.png Ballasted R72 Curve Track (PennLUG variation)
Instructions to ballast a single ME Models R72 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava. 		5 A 86
Download Ref Sheet 007 Rev A
008 008BallastedR88Curve.png Ballasted R88 Curve Track (PennLUG variation)
Instructions to ballast a single ME Models R88 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava. 		6 A 66
Download Ref Sheet 008 Rev A
009 009BallastedR104Curve.png Ballasted R104 Curve Track (PennLUG variation)
Instructions to ballast a single ME Models R104 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava. 		11 A 87
Download Ref Sheet 009 Rev A
010 R56BallastCurve.png Ballasted R56 Curve Track Baseplates
Instructions to make a baseplate substrate for a quarter circle R56 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		21 A 332
Download Ref Sheet 010 Rev A
011 R72BallastCurve.png Ballasted R72 Curve Track Baseplates
Instructions to make a baseplate substrate for a quarter circle R72 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		22 A 428
Download Ref Sheet 011 Rev A
012 R88BallastBase.png Ballasted R88 Curve Track Baseplates
Instructions to make a baseplate substrate for a quarter circle R88 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		25 A 437
Download Ref Sheet 012 Rev A
013 R104BallastBase.png Ballasted R104 Curve Track Baseplates
Instructions to make a baseplate substrate for a quarter circle R104 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		9 B 520
Download Ref Sheet 013 Rev A
Download Ref Sheet 013 Rev B - Light Mode
Download Ref Sheet 013 Rev B - Dark Mode
014 Ref014BallastSwitchLeft.png Ballasted Left Switch (even ties/sleepers)
Instructions to make a ballasted left-hand track switch including the baseplate substrate. This variation has ties/sleepers located at even stud intervals. Instructions for odd stud intervals are contained in another reference sheet. Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 015. The baseplate colour as well as other items can be substituted as desired. 		20 A 277
Download Ref Sheet 014 Rev A
015 CompleteLeftSwitchEvenWithReturn.png Ballasted Left Switch Return Curve
Instructions to make a ballasted parallel return curve from a left-hand track switch. Instructions for the corresponding left switch can be found in sheet 014. The baseplate colour as well as other items can be substituted as desired. 		3 A 63
Download Ref Sheet 015 Rev A
016 RightSwitchEven.png Ballasted Right Switch (even ties/sleepers)
Instructions to make a ballasted right-hand track switch including the baseplate substrate. This variation has ties/sleepers located at even stud intervals. Instructions for odd stud intervals are contained in another reference sheet. Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 017. The baseplate colour as well as other items can be substituted as desired. 		20 A 278
Download Ref Sheet 016 Rev A
017 CompleteRightSwitchEvenWithReturn.png Ballasted Right Switch Return Curve
Instructions to make a ballasted parallel return curve from a right-hand track switch. Instructions for the corresponding left switch can be found in sheet 016. The baseplate colour as well as other items can be substituted as desired. 		3 A 63
Download Ref Sheet 017 Rev A
018 Ref018Image.png Ballasted R120 Curve Track (PennLUG variation) *** Deprecated: please see Ref 023 instead ***
Instructions to make a baseplate substrate for a quarter circle R120 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		3 B 110
Download Ref Sheet 018 Rev B
019 T019BallastedR56Curve.png Ballasted R56 Curve Track
Instructions to ballast a single R56 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BlueBrixx 103352, BrickTracks R56PFDBG8, TrixBrix R56, and Fx Bricks 8856. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 		8 A 87
Download Ref Sheet 019 Rev A - Light Mode
Download Ref Sheet 019 Rev A - Dark Mode
020 T020BallastedR72Curve.png Ballasted R72 Curve Track
Instructions to ballast a single Fx Bricks brand R72 curve track element (Fx Track product 8872) using the PennLUG ballasting style. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 		6 A 100
Download Ref Sheet 020 Rev A - Light Mode
Download Ref Sheet 020 Rev A - Dark Mode
021 T021BallastedR88Curve.png Ballasted R88 Curve Track
Instructions to ballast a single R88 curve track element using the PennLUG ballasting style. This ballast method is compatible with: TrixBrix R88, and Fx Bricks 8888. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 		7 A 57
Download Ref Sheet 021 Rev A - Light Mode
Download Ref Sheet 021 Rev A - Dark Mode
022 T022BallastedR104Curve.png Ballasted R104 Curve Track
Instructions to ballast a single R104 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BrickTracks R104PFDBG8, TrixBrix R104, and Fx Bricks 8904. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 		6 A 72
Download Ref Sheet 022 Rev A - Light Mode
Download Ref Sheet 022 Rev A - Dark Mode
023 T023BallastedR120Curve.png Ballasted R120 Curve Track
Instructions to ballast a single R120 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BrickTracks R120PFDBG8 and Fx Bricks 8920. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. 		7 B 98
Download Ref Sheet 023 Rev B - Light Mode
Download Ref Sheet 023 Rev B - Dark Mode
024 R120BallastedBaseThumb.png Ballasted R120 Curve Track Baseplates
Instructions to make a baseplate substrate for a quarter circle R120 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. 		10 A 586
Download Ref Sheet 024 Rev A - Light Mode
Download Ref Sheet 024 Rev A - Dark Mode

Bogies / Trucks / Wheels

Sheet ID Preview Description Pages Rev Pieces
100 Ref100.png AAR 50 Ton Freight Truck
Instructions to make a North American AAR 50 ton freight truck/bogie. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Cale Leiphart and Dan Aubin for input on this design. 		4 D 51
Download Ref Sheet 100 Rev D
101 Ref101.png AAR Barber S-2 / ASF A-3 Freight Truck
Instructions to make a North American 50 ton Barber S-2 or ASF A-3 freight truck/bogie. This freight truck depicts the solid axle bearing type with its distinctive journal boxes. This design of solid axle truck was introduced in the 1940s and were discontinued in 1966. All solid axle trucks were banned from service in 1980. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Cale Leiphart and Josh Sanders for input on this design. 		4 A 58
Download Ref Sheet 101 Rev A
102 Ref102.png AAR 70 Ton Roller Bearing Freight Truck
Instructions to make a North American 70 ton roller bearing freight truck/bogie. Since the discontinuation of solid axle trucks starting in 1966, all modern era freight cars use roller bearing axle trucks. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Cale Leiphart and Josh Sanders for input on this design. 		4 A 54
Download Ref Sheet 102 Rev A
103 Ref103.png Osgood Bradley Passenger Coach Truck
Instructions to make a North American Osgood Bradley lightweight passenger coach truck/bogie. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Matt Csenge and Vinnie Fusca for input on this design. 		6 A 73
Download Ref Sheet 103 Rev A
104 Ref104.png 3-Axle Heavyweight Passenger Coach Truck
Instructions to make a North American 3-axle heavyweight passenger coach truck/bogie. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. The centre axle must have free lateral movement of at least ±2mm in order to negotiate curves and switches. This can be achieved by cutting the brass axle bearing shorter than the outer fixed axle bearings. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Nate Brill, Matt Csenge and Vinnie Fusca for input on this design. 		5 A 61
Download Ref Sheet 104 Rev A
105 Ref105Image.png Sambre et Meuse European Freight Bogie
Instructions to make a European freight bogie manufactured by Sambre et Meuse of France. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Ronald Vallenduuk for this design. 		3 A 54
Download Ref Sheet 105 Rev A
106 Ref106Image.png Minden Deutz MD-36 European Passenger Bogie
Instructions to make a MD-36 European passenger bogie manufactured by Minden Deutz. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Ronald Vallenduuk for this design. 		5 B 78
Download Ref Sheet 106 Rev B

MILS Train Modules

Sheet ID Preview Description Pages Rev Pieces
200 Ref200Image.png MILS Basic Terrain Module (BTM) Base for Single Track (16 x 32)
Instructions to build a MILS compatible mounting base for ballasted straight single track. Instructions for the ballasted straight track sections can be found in reference sheet 001. 		6 A 100
Download Ref Sheet 200 Rev A
201 Ref201Image.png MILS Basic Terrain Module (BTM) Base for Double Track (32 x 32)
Instructions to build a MILS compatible mounting base for ballasted straight double track. Instructions for the ballasted straight track sections can be found in reference sheet 001. 		8 A 175
Download Ref Sheet 201 Rev A
202 Ref202Image.png MILS Track Elevation Transition Set 3x (16 x 32)
Instructions to build a set of 3 modules which act as both a functional and cosmetic transition between a MILS layout domain and a baseplate/tabletop domain. This transition provides a mounting base for ballasted straight track along a smooth nominal gradient of 1 plate/16 studs. Instructions for the ballasted straight track sections can be found in reference sheet 001. 		13 A 205
Download Ref Sheet 202 Rev A
203 Ref203Image.png MILS Single Track Level Crossing (16 x 32)
Instructions to build a single track level/grade crossing compatible with the MILS Single Track BTM base module (Ref Sheet 200). 		8 A 118
Download Ref Sheet 203 Rev A
204 Ref204Image.png MILS Double Track Level Crossing (32 x 32)
Instructions to build a double track level/grade crossing compatible with the MILS Double Track BTM base module (Ref Sheet 201). 		14 A 260
Download Ref Sheet 204 Rev A

MILS MultiRoad Modules

MultiRoadCatalog3.png

Sheet ID Preview Description Pages Rev Pieces
Road Module Bases
300 Ref300Image.png MILS MultiRoad Straight Road BTM Base 32
Instructions to build a MILS compatible mounting base for a 32 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM). 		5 A 108
Download Ref Sheet 300 Rev A
301 Ref301Image.png MILS MultiRoad Straight Road City Base 32
Instructions to build a MILS compatible mounting base for a 32 stud long straight road section with city sidewalks. 		7 A 192
Download Ref Sheet 301 Rev A
302 Ref302Image.png MILS MultiRoad Straight Road BTM Base 16
Instructions to build a MILS compatible mounting base for a 16 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM). 		4 A 65
Download Ref Sheet 302 Rev A
303 Ref303Image.png MILS MultiRoad Straight Road City Base 16
Instructions to build a MILS compatible mounting base for a 16 stud long straight road section with city sidewalks. 		6 A 107
Download Ref Sheet 303 Rev A
304 Ref304Image.png MILS MultiRoad T Junction Road BTM Base
Instructions to build a MILS compatible mounting base for a T junction road section compatible with adjacent Basic Terrain Modules (BTM). 		6 A 104
Download Ref Sheet 304 Rev A
305 Ref305Image.png MILS MultiRoad T Junction Road City Base
Instructions to build a MILS compatible mounting base for a T junction road section with city sidewalks. 		7 A 154
Download Ref Sheet 305 Rev A
306 Ref306Image.png MILS MultiRoad X Junction Road BTM Base
Instructions to build a MILS compatible mounting base for a X junction road section compatible with adjacent Basic Terrain Modules (BTM). 		6 A 100
Download Ref Sheet 306 Rev A
307 Ref307Image.png MILS MultiRoad X Junction Road City Base
Instructions to build a MILS compatible mounting base for a X junction road section with city sidewalks. 		6 A 116
Download Ref Sheet 307 Rev A
308 Ref308Image.png MILS MultiRoad Cobblestone Road 32
Instructions to build a MILS compatible cobblestone road surface on a specialized 32 x 32 base. The sidewalks and road dimensions are compatible with MultiRoad City modules. Thanks to Ludo Soete for contributing these instructions. 		11 A 1317
Download Ref Sheet 308 Rev A
309 Ref309Image.png MILS MultiRoad Modular Building Adapter Base 32
Instructions to build a MILS compatible mounting base to seamlessly integrate 32 x 32 LEGO® Modular Buildings into a MILS layout using MultiRoad City bases. 		5 A 129
Download Ref Sheet 309 Rev A
Roadway Lane Modules
310 Ref310Image.png MILS MultiRoad Left Lane 32
Instructions to build a 32 stud left lane section for a MultiRoad base module. 		3 A 45
Download Ref Sheet 310 Rev A
311 Ref311Image.png MILS MultiRoad Right Lane 32
Instructions to build a 32 stud right lane section for a MultiRoad base module. 		3 A 37
Download Ref Sheet 311 Rev A
312 Ref312Image.png MILS MultiRoad Left Lane 16
Instructions to build a 16 stud left lane section for a MultiRoad base module. 		2 A 26
Download Ref Sheet 312 Rev A
313 Ref313Image.png MILS MultiRoad Right Lane 16
Instructions to build a 16 stud right lane section for a MultiRoad base module. 		2 A 18
Download Ref Sheet 313 Rev A
314 Ref314Image.png MILS MultiRoad Left Crosswalk 32
Instructions to build a 32 stud left lane section which includes a pedestrian crossing for a MultiRoad base module. 		9 A 58
Download Ref Sheet 314 Rev A
315 Ref315Image.png MILS MultiRoad Right Crosswalk 32
Instructions to build a 32 stud right lane section which includes a pedestrian crossing for a MultiRoad base module. 		5 A 52
Download Ref Sheet 315 Rev A
Roadway Stripes and Markings
319 Ref319Image.png MILS MultiRoad T Junction Crosswalk
Instructions to build a T junction road segment with a crosswalk. This can be used with any of the T and X junction road sections. This segment mounts to either a left or right lane module in the same way as a line marking section does. 		4 A 72
Download Ref Sheet 319 Rev A
320 Ref320Image.png MILS MultiRoad Junction Road Segment
Instructions to build a junction road segment which can be used with any of the T and X junction road sections. This segment mounts to either a left or right lane module in the same way as a line marking section does. 		6 A 90
Download Ref Sheet 320 Rev A
321 Ref321Image.png MILS MultiRoad Solid White Line 32
Instructions to build a 32 stud solid white line marking which can be mounted to either the left, centre or right lane positions. 		2 A 22
Download Ref Sheet 321 Rev A
322 Ref322Image.png MILS MultiRoad Solid White Line 16
Instructions to build a 16 stud solid white line marking which can be mounted to either the left, centre or right lane positions. 		2 A 12
Download Ref Sheet 322 Rev A
323 Ref323Image.png MILS MultiRoad Dashed White Line 32
Instructions to build a 32 stud dashed white line marking which can be mounted to either the left, centre or right lane positions. 		3 A 27
Download Ref Sheet 323 Rev A
324 Ref324Image.png MILS MultiRoad Dashed White Line 16
Instructions to build a 16 stud dashed white line marking which can be mounted to either the left, centre or right lane positions. 		2 A 15
Download Ref Sheet 324 Rev A
325 Ref325Image.png MILS MultiRoad Double Yellow Line 32
Instructions to build a 32 stud double yellow line marking which can be mounted to either the left, centre or right lane positions. 		2 A 23
Download Ref Sheet 325 Rev A
326 Ref326Image.png MILS MultiRoad Double Yellow Line 16
Instructions to build a 16 stud double yellow line marking which can be mounted to either the left, centre or right lane positions. 		2 A 13
Download Ref Sheet 326 Rev A
328 Ref328Image.png MILS MultiRoad X Junction Left Lane
Instructions to build the left lane side of a X junction with pedestrian crosswalks on all 4 routes of the junction. Combine with sheet 329 to make a complete junction. 		11 A 177
Download Ref Sheet 328 Rev A
329 Ref329Image.png MILS MultiRoad X Junction Right Lane
Instructions to build the right lane side of a X junction with pedestrian crosswalks on all 4 routes of the junction. Combine with sheet 328 to make a complete junction. 		8 A 139
Download Ref Sheet 329 Rev A
Roadway Entrances and Parking
330 Ref330Image.png MILS MultiRoad T Laneway Entrance
Instructions to build a laneway or driveway entrance off of a main road. The lane entrance can be used to transition to a parking lot, a driveway to a building or a minor roadway. Instructions generously contributed by Ludo Soete. 		8 A 213
Download Ref Sheet 330 Rev A
331 Ref331Image.png MILS MultiRoad Parking Lot Left Side Markings
Instructions to build a modular parking lot section with left hand separator markings. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete. 		5 A 208
Download Ref Sheet 331 Rev A
332 Ref332Image.png MILS MultiRoad Parking Lot Right Side Markings
Instructions to build a modular parking lot section with right hand separator markings. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete. 		5 A 208
Download Ref Sheet 332 Rev A
333 Ref333Image.png MILS MultiRoad Parking Lot Left with Disabled Space
Instructions to build a modular parking lot section with left hand separator markings and a dedicated space for disabled parking. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete. 		7 A 220
Download Ref Sheet 333 Rev A
334 Ref334Image.png MILS MultiRoad Parking Lot Right with Disabled Space
Instructions to build a modular parking lot section with right hand separator markings and a dedicated space for disabled parking. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete. 		7 A 220
Download Ref Sheet 334 Rev A
Modular Walkway with Decorative Feature Inserts
335 Ref335Image.png MILS MultiRoad Walkway Base 16x32
Instructions to build a modular walkway base section with two open spaces to insert a modular flowerbed, fountain, or other decorative feature. Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		12 A 230
Download Ref Sheet 335 Rev A - Light Mode
Download Ref Sheet 335 Rev A - Dark Mode
336 Ref336Image.png MILS MultiRoad Flower Bed Module
Instructions to build a modular flower bed module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		2 A 23
Download Ref Sheet 336 Rev A - Light Mode
Download Ref Sheet 336 Rev A - Dark Mode
337 Ref337Image.png MILS MultiRoad Fountain Module
Instructions to build a modular fountain module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		5 A 90
Download Ref Sheet 337 Rev A - Light Mode
Download Ref Sheet 337 Rev A - Dark Mode
338 Ref338Image.png MILS MultiRoad Tree Bed Module
Instructions to build a modular tree bed module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		3 A 34
Download Ref Sheet 338 Rev A - Light Mode
Download Ref Sheet 338 Rev A - Dark Mode
339 Ref339Image.png MILS MultiRoad Walkway Base 16x16
Instructions to build a modular walkway base section with one open space to insert a modular flowerbed, fountain, or other decorative feature. Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		9 A 132
Download Ref Sheet 339 Rev A - Light Mode
Download Ref Sheet 339 Rev A - Dark Mode
340 Ref340Image.png MILS MultiRoad Walkway Plain Module
Instructions to build a plain walkway module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		2 A 33
Download Ref Sheet 340 Rev A - Light Mode
Download Ref Sheet 340 Rev A - Dark Mode
341 Ref341Image.png MILS MultiRoad Walkway Statue Module
Instructions to build a statue which can be inserted into the tree bed module (338). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete. 		3 B 46
Download Ref Sheet 341 Rev B - Light Mode
Download Ref Sheet 341 Rev B - Dark Mode

ViaTrack System Components

ViaTrackCatalog3.png

Sheet ID Preview Description Pages Rev Pieces
Track Modules
410 Ref410Image.png ViaTrack Ballasted Concrete Tie/Sleeper Track
Instructions to build a typical ballasted concrete tie/sleeper track section. This track assembly can be directly mounted to the track frame module Ref 440. 		2 A 54
Download Ref Sheet 410 Rev A
411 Ref411Image.png ViaTrack Flat Slab Concrete Track
Instructions to build a solid slab concrete track assembly. This assembly is designed to fit the track mounting base Ref 421. The combined assembly can then be mounted to the track frame module Ref 440. 		2 A 37
Download Ref Sheet 411 Rev A
412 Ref412Image.png ViaTrack Open Slab Concrete Track
Instructions to build an open frame slab concrete track assembly. This assembly is designed to fit the track mounting base Ref 422 or Ref 423. The combined assembly can then be mounted to the track frame module Ref 440. 		2 A 60
Download Ref Sheet 412 Rev A
421 Ref421Image.png ViaTrack Flat Slab Track Base
Instructions to build a mounting base for the flat slab concrete track assembly Ref 411. The combined assembly can be mounted to the track frame module Ref 440. 		2 A 48
Download Ref Sheet 421 Rev A
422 Ref422Image.png ViaTrack Open Frame Track Base Concrete
Instructions to build a mounting base for the open frame concrete track assembly Ref 412. The combined assembly can be mounted to the track frame module Ref 440. 		2 A 53
Download Ref Sheet 422 Rev A
423 Ref423Image.png ViaTrack Open Frame Track Base Ballasted
Instructions to build a mounting base for the open frame concrete track assembly Ref 412. The combined assembly can be mounted to the track frame module Ref 440. 		2 A 53
Download Ref Sheet 423 Rev A
440 Ref440ImageB.png ViaTrack Mounting Frame for Double Track
Instructions to build a mounting frame which is used to support track sections, cosmetic track borders and clip-in wall sections. The mounting frame can be freely mounted to a supporting viaduct structure below. 		6 B 178
Download Ref Sheet 440 Rev B
Track Border Panels
450 Ref450Image.png ViaTrack Concrete Track Border
Instructions to build a concrete track border panel (3 x 32). 		2 A 24
Download Ref Sheet 450 Rev A
451 Ref451Image.png ViaTrack Concrete Track Centre
Instructions to build a centre concrete track border panel (8 x 16). 		2 A 13
Download Ref Sheet 451 Rev A
452 Ref452Image.png ViaTrack Ballast Track Border
Instructions to build a ballasted track border panel (3 x 32). 		2 A 23
Download Ref Sheet 452 Rev A
453 Ref453Image.png ViaTrack Ballasted Track Centre
Instructions to build a centre ballasted track border panel (8 x 16). 		2 A 14
Download Ref Sheet 453 Rev A
Clip-in Cosmetic Wall Modules
460 Ref460Image.png ViaTrack Concrete Panelled Wall Section
Instructions to build a concrete panelled wall section. This wall assembly can be clipped to either side of the track frame Ref 440 assembly. 		2 A 33
Download Ref Sheet 460 Rev A
461 Ref461Image.png ViaTrack Open Girder Wall Section
Instructions to build a open girder wall section. This wall assembly can be clipped to either side of the track frame Ref 440 assembly. 		2 A 23
Download Ref Sheet 461 Rev A
463 Ref463Image.png ViaTrack Girder Bridge Sides
Instructions to build cosmetic girder bridge side walls designed to clip to either side of the track frame Ref 440 assembly. This bridge assembly can be customized by building in different colours or by substituting or removing the hazard strip. 		13 A 170
Download Ref Sheet 463 Rev A
464 Ref464Image.png ViaTrack Short Concrete Panelled Wall Section
Instructions to build a short concrete panelled wall section. This wall assembly can be clipped to either side of the track frame Ref 440 assembly. 		2 A 28
Download Ref Sheet 464 Rev A
Viaduct Structures
470 Ref470Image.png ViaTrack Poured Concrete Viaduct
Instructions to build a poured concrete viaduct pier. This viaduct section is designed to support a track mounting frame above. 		12 A 316
Download Ref Sheet 470 Rev A
471 Ref471Image.png ViaTrack Precast Concrete Viaduct
Instructions to build a typical open-frame pre-cast concrete viaduct. This viaduct section is designed to support a track mounting frame above. The side facing 2x2 tile elements can be removed to add trackside accessories such as overhead line gantries, signals, lights, signs, etc. 		16 A 346
Download Ref Sheet 471 Rev A
Retrieved from "http://l-gauge.org/wiki/index.php?title=Reference_Instructions&oldid=614"