Reference Instructions

Sample Reference Instruction Sheets

Reference Instruction sheets can be downloaded from the table below. Instruction sheets are provided in PDF format for convenience and should be able to be viewed on nearly all platforms with a suitable PDF viewer application.

Track Related Instructions

Sheet ID	Preview	Description	Pages	Rev
001		Ballasted Straight Track (PennLUG variation) Instructions to ballast a single full straight track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Instructions for the baseplate substrate can be found in reference sheets 002 and 003.	3	A
		Download Ref Sheet 001 Rev A
002		Ballasted Straight Track Baseplates (16x32) Instructions to make a substrate for straight ballasted track on a 16x32 baseplate. The baseplate colour as well as other items can be substituted as desired.	1	A
		Download Ref Sheet 002 Rev A
003		Ballasted Straight Track Baseplates (16x16) Instructions to make a substrate for straight ballasted track on a 16x16 baseplate. The baseplate colour as well as other items can be substituted as desired.	1	A
		Download Ref Sheet 003 Rev A
004		Ballasted R40 Curve Track (PennLUG variation) Instructions to ballast a single R40 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Instructions for the baseplate substrate can be found in reference sheet 005.	4	A
		Download Ref Sheet 004 Rev A
005		Ballasted R40 Curve Track Baseplates Instructions to make a baseplate substrate for a quarter circle R40 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired.	22	A
		Download Ref Sheet 005 Rev A
006		Ballasted R56 Curve Track (PennLUG variation) Instructions to ballast a single ME Models R56 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.	4	A
		Download Ref Sheet 006 Rev A
007		Ballasted R72 Curve Track (PennLUG variation) Instructions to ballast a single ME Models R72 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.	5	A
		Download Ref Sheet 007 Rev A
008		Ballasted R88 Curve Track (PennLUG variation) Instructions to ballast a single ME Models R88 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.	6	A
		Download Ref Sheet 008 Rev A
009		Ballasted R104 Curve Track (PennLUG variation) Instructions to ballast a single ME Models R104 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.	11	A
		Download Ref Sheet 009 Rev A
010		Ballasted R56 Curve Track Baseplates Instructions to make a baseplate substrate for a quarter circle R56 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired.	21	A
		Download Ref Sheet 010 Rev A
011		Ballasted R72 Curve Track Baseplates Instructions to make a baseplate substrate for a quarter circle R72 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired.	22	A
		Download Ref Sheet 011 Rev A
012		Ballasted R88 Curve Track Baseplates Instructions to make a baseplate substrate for a quarter circle R88 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired.	25	A
		Download Ref Sheet 012 Rev A
013		Ballasted R104 Curve Track Baseplates Instructions to make a baseplate substrate for a quarter circle R104 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired.	29	A
		Download Ref Sheet 013 Rev A
014		Ballasted Left Switch (even ties/sleepers) Instructions to make a ballasted left-hand track switch including the baseplate substrate. This variation has ties/sleepers located at even stud intervals. Instructions for odd stud intervals are contained in another reference sheet. Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 015. The baseplate colour as well as other items can be substituted as desired.	20	A
		Download Ref Sheet 014 Rev A
015		Ballasted Left Switch Return Curve Instructions to make a ballasted parallel return curve from a left-hand track switch. Instructions for the corresponding left switch can be found in sheet 014. The baseplate colour as well as other items can be substituted as desired.	3	A
		Download Ref Sheet 015 Rev A
016		Ballasted Right Switch (even ties/sleepers) Instructions to make a ballasted right-hand track switch including the baseplate substrate. This variation has ties/sleepers located at even stud intervals. Instructions for odd stud intervals are contained in another reference sheet. Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 017. The baseplate colour as well as other items can be substituted as desired.	20	A
		Download Ref Sheet 016 Rev A
017		Ballasted Right Switch Return Curve Instructions to make a ballasted parallel return curve from a right-hand track switch. Instructions for the corresponding left switch can be found in sheet 016. The baseplate colour as well as other items can be substituted as desired.	3	A
		Download Ref Sheet 017 Rev A

Bogie / Truck Related Instructions

Sheet ID	Preview	Description	Pages	Rev
100		AAR 50 Ton Freight Truck Instructions to make a North American AAR 50 ton freight truck/bogie. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Cale Leiphart and Dan Aubin for input on this design.	4	D
		Download Ref Sheet 100 Rev D
101		AAR Barber S-2 / ASF A-3 Freight Truck Instructions to make a North American 50 ton Barber S-2 or ASF A-3 freight truck/bogie. This freight truck depicts the solid axle bearing type with its distinctive journal boxes. This design of solid axle truck was introduced in the 1940s and were discontinued in 1966. All solid axle trucks were banned from service in 1980. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Cale Leiphart and Josh Sanders for input on this design.	4	A
		Download Ref Sheet 101 Rev A
102		AAR 70 Ton Roller Bearing Freight Truck Instructions to make a North American 70 ton roller bearing freight truck/bogie. Since the discontinuation of solid axle trucks starting in 1966, all modern era freight cars use roller bearing axle trucks. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Cale Leiphart and Josh Sanders for input on this design.	4	A
		Download Ref Sheet 102 Rev A
103		Osgood Bradley Passenger Coach Truck Instructions to make a North American Osgood Bradley lightweight passenger coach truck/bogie. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Matt Csenge and Vinnie Fusca for input on this design.	6	A
		Download Ref Sheet 103 Rev A
104		3-Axle Heavyweight Passenger Coach Truck Instructions to make a North American 3-axle heavyweight passenger coach truck/bogie. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. The centre axle must have free lateral movement of at least ±2mm in order to negotiate curves and switches. This can be achieved by cutting the brass axle bearing shorter than the outer fixed axle bearings. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Nate Brill, Matt Csenge and Vinnie Fusca for input on this design.	5	A
		Download Ref Sheet 104 Rev A
105	230px	Sambre et Meuse European Freight Bogie Instructions to make a European freight bogie manufactured by Sambre et Meuse of France. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Ronald Vallenduuk for this design.	3	A
		Download Ref Sheet 105 Rev A
106	230px	Minden Deutz MD-36 European Freight Bogie Instructions to make a MD-36 European freight bogie manufactured by Minden Deutz. This truck design requires the use of non-LEGO® brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from K&S Metals (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081" diameter brass rod (K&S Metals P/N 8168). Credit to Ronald Vallenduuk for this design.	5	A
		Download Ref Sheet 106 Rev A

MILS Train Modules Instructions

Sheet ID	Preview	Description	Pages	Rev
200		MILS Basic Terrain Module (BTM) Base for Single Track Instructions to build a MILS compatible mounting base for ballasted straight single track. Instructions for the ballasted straight track sections can be found in reference sheet 001.	6	A
		Download Ref Sheet 200 Rev A
201		MILS Basic Terrain Module (BTM) Base for Double Track Instructions to build a MILS compatible mounting base for ballasted straight double track. Instructions for the ballasted straight track sections can be found in reference sheet 001.	8	A
		Download Ref Sheet 201 Rev A
202		MILS Track Elevation Transition Set Instructions to build a set of 3 modules which act as both a functional and cosmetic transition between a MILS layout domain and a baseplate/tabletop domain. This transition provides a mounting base for ballasted straight track along a smooth nominal gradient of 1 plate/16 studs. Instructions for the ballasted straight track sections can be found in reference sheet 001.	13	A
		Download Ref Sheet 202 Rev A
203		MILS Single Track Level Crossing Instructions to build a single track level/grade crossing compatible with the MILS Single Track BTM base module (Ref Sheet 200).	8	A
		Download Ref Sheet 203 Rev A
204		MILS Double Track Level Crossing Instructions to build a double track level/grade crossing compatible with the MILS Double Track BTM base module (Ref Sheet 201).	14	A
		Download Ref Sheet 204 Rev A

MILS MultiRoad Modules Instructions

Sheet ID	Preview	Description	Pages	Rev	Pieces
300		MILS MultiRoad Straight Road BTM Base 32 Instructions to build a MILS compatible mounting base for a 32 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM).	5	A	108
		Download Ref Sheet 300 Rev A
301		MILS MultiRoad Straight Road City Base 32 Instructions to build a MILS compatible mounting base for a 32 stud long straight road section with city sidewalks.	7	A	192
		Download Ref Sheet 301 Rev A
302		MILS MultiRoad Straight Road BTM Base 16 Instructions to build a MILS compatible mounting base for a 16 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM).	4	A	65
		Download Ref Sheet 302 Rev A
303		MILS MultiRoad Straight Road City Base 16 Instructions to build a MILS compatible mounting base for a 16 stud long straight road section with city sidewalks.	6	A	107
		Download Ref Sheet 303 Rev A
304		MILS MultiRoad T Junction Road BTM Base Instructions to build a MILS compatible mounting base for a T junction road section compatible with adjacent Basic Terrain Modules (BTM).	6	A	104
		Download Ref Sheet 304 Rev A
305		MILS MultiRoad T Junction Road City Base Instructions to build a MILS compatible mounting base for a T junction road section with city sidewalks.	7	A	154
		Download Ref Sheet 305 Rev A
306		MILS MultiRoad X Junction Road BTM Base Instructions to build a MILS compatible mounting base for a X junction road section compatible with adjacent Basic Terrain Modules (BTM).	6	A	100
		Download Ref Sheet 306 Rev A
307		MILS MultiRoad X Junction Road City Base Instructions to build a MILS compatible mounting base for a X junction road section with city sidewalks.	6	A	116
		Download Ref Sheet 307 Rev A
309		MILS MultiRoad Modular Building Adapter Base 32 Instructions to build a MILS compatible mounting base to seamlessly integrate 32 x 32 Lego Modular Buildings into a MILS layout using MultiRoad City bases.	5	A	129
		Download Ref Sheet 309 Rev A
310		MILS MultiRoad Left Lane 32 Instructions to build a 32 stud left lane section for a MultiRoad base module.	3	A	45
		Download Ref Sheet 310 Rev A
311		MILS MultiRoad Right Lane 32 Instructions to build a 32 stud right lane section for a MultiRoad base module.	3	A	37
		Download Ref Sheet 311 Rev A
312		MILS MultiRoad Left Lane 16 Instructions to build a 16 stud left lane section for a MultiRoad base module.	2	A	26
		Download Ref Sheet 312 Rev A
313		MILS MultiRoad Right Lane 16 Instructions to build a 16 stud right lane section for a MultiRoad base module.	2	A	18
		Download Ref Sheet 313 Rev A
314		MILS MultiRoad Left Crosswalk 32 Instructions to build a 32 stud left lane section which includes a pedestrian crossing for a MultiRoad base module.	9	A	58
		Download Ref Sheet 314 Rev A
315		MILS MultiRoad Right Crosswalk 32 Instructions to build a 32 stud right lane section which includes a pedestrian crossing for a MultiRoad base module.	5	A	52
		Download Ref Sheet 315 Rev A
320		MILS MultiRoad Junction Road Segment Instructions to build a junction road segment which can be used with any of the T and X junction road sections. This segment mounts to either a left or right lane module in the same way as a line marking section does.	6	A	90
		Download Ref Sheet 320 Rev A
321		MILS MultiRoad Solid White Line 32 Instructions to build a 32 stud solid white line marking which can be mounted to either the left, centre or right lane positions.	2	A	22
		Download Ref Sheet 321 Rev A
322		MILS MultiRoad Solid White Line 16 Instructions to build a 16 stud solid white line marking which can be mounted to either the left, centre or right lane positions.	2	A	12
		Download Ref Sheet 322 Rev A
323		MILS MultiRoad Dashed White Line 32 Instructions to build a 32 stud dashed white line marking which can be mounted to either the left, centre or right lane positions.	3	A	27
		Download Ref Sheet 323 Rev A
324		MILS MultiRoad Dashed White Line 16 Instructions to build a 16 stud dashed white line marking which can be mounted to either the left, centre or right lane positions.	2	A	15
		Download Ref Sheet 324 Rev A
325		MILS MultiRoad Double Yellow Line 32 Instructions to build a 32 stud double yellow line marking which can be mounted to either the left, centre or right lane positions.	2	A	23
		Download Ref Sheet 325 Rev A
326		MILS MultiRoad Double Yellow Line 16 Instructions to build a 16 stud double yellow line marking which can be mounted to either the left, centre or right lane positions.	2	A	13
		Download Ref Sheet 326 Rev A