Standard:Reference Track Configurations

From L-Gauge
Revision as of 14:36, 7 May 2015 by Editor (talk | contribs)
Jump to navigation Jump to search

The reference track configurations shown below can be useful for layout planning purposes or for just gaining greater insight into the LEGO® track system geometry. The configurations shown are all intended to be built using standard/unmodified track products. Almost all configurations conform to the conventions of 16-stud parallel track separation and nominally aligning to an 8-stud or 16-stud grid interval.

The track diagrams are illustrated in schematic form for easy interpretation. All diagrams have a superimposed 8-stud grid for interpretation of scale and for recognizing baseplate boundaries. Straight sections of track typically use the "standard" length 16-stud section shown as "1x"; these can represent LEGO® brand 9V or RC straights or the ME Models full straight. Some diagrams show "1/2" and "1/4" length straight sections representing the ME Models half straight and a single LEGO® flex track segment respectively.

Parallel Curves

RefParallelCurves.png

Reverse Loops

R40 Reverse Loop

RefRevCurveR40.png

R56 Reverse Loop

RefRevCurveR56.png

R72 Reverse Loop

RefRevCurveR72.png

R88 Reverse Loop

RefRevCurveR88.png

S-Bends

Lateral Offset: 16 Studs

RefSBend16.png

Lateral Offset: 32 Studs

RefSBend32.png

Lateral Offset: 64 Studs

RefSBend64.png

Lateral Offset: 52 Studs

RefSBend52.png

Lateral Offset: 92 Studs

RefSBend92.png

Lateral Offset: 104 Studs

RefSBend104.png

Crossovers

RefCrossovers.png

Return Curves

RefReturnCurves.png

Diagonal Track

22.5º Diagonal Track

RefDiagTrack22.png

45º Diagonal Track

RefDiagTrack45.png

Junctions

Y-Junctions

RefYJunctions.png

Junction Diamonds

RefJunctionCrossing.png

Yard Sidings

Grid Aligned Yard Ladder

RefYardLadder1.png

Compact Non-Aligned Yard Ladder

RefYardLadder2.png

Grid Aligned Diagonal Yard Ladder

RefYardDiag.png