Difference between revisions of "Standard:Reference Track Configurations"

From L-Gauge
Jump to navigation Jump to search
Line 1: Line 1:
 +
The reference track configurations shown below can be useful for layout planning purposes or for just gaining greater insight into the LEGO® track system geometry.  The configurations shown are all intended to be built using standard/unmodified track products.  Almost all configurations conform to the conventions of 16-stud parallel track separation and nominally aligning to an 8-stud or 16-stud grid interval. 
 +
 +
The track diagrams are illustrated in schematic form for easy interpretation.  All diagrams have a superimposed 8-stud grid for interpretation of scale and for recognizing baseplate boundaries.  Straight sections of track typically use the "standard" length 16-stud section shown as "1x"; these can represent LEGO® brand 9V or RC straights or the ME Models full straight.  Some diagrams show "1/2" and "1/4" length straight sections representing the ME Models half straight and a single LEGO® flex track segment respectively. 
 +
 
== Parallel Curves ==
 
== Parallel Curves ==
  

Revision as of 13:24, 7 May 2015

The reference track configurations shown below can be useful for layout planning purposes or for just gaining greater insight into the LEGO® track system geometry. The configurations shown are all intended to be built using standard/unmodified track products. Almost all configurations conform to the conventions of 16-stud parallel track separation and nominally aligning to an 8-stud or 16-stud grid interval.

The track diagrams are illustrated in schematic form for easy interpretation. All diagrams have a superimposed 8-stud grid for interpretation of scale and for recognizing baseplate boundaries. Straight sections of track typically use the "standard" length 16-stud section shown as "1x"; these can represent LEGO® brand 9V or RC straights or the ME Models full straight. Some diagrams show "1/2" and "1/4" length straight sections representing the ME Models half straight and a single LEGO® flex track segment respectively.

Parallel Curves

RefParallelCurves.png

Reverse Curves

R40 Reverse Curve

RefRevCurveR40.png

R56 Reverse Curve

RefRevCurveR56.png

R72 Reverse Curve

RefRevCurveR72.png

R88 Reverse Curve

RefRevCurveR88.png

S-Bends

Lateral Offset: 16 and 32 Studs

Lateral Offset: 64 Studs

Crossovers

RefCrossovers.png

Diagonal Track

22.5º Diagonal Track

RefDiagTrack22.png

45º Diagonal Track

RefDiagTrack45.png

Junctions

Y-Junctions

RefYJunctions.png

Junction Diamonds

RefJunctionCrossing.png

Return Curves

RefReturnCurves.png