MediaWiki API result
This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.
Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.
See the complete documentation, or the API help for more information.
{
"batchcomplete": "",
"continue": {
"gapcontinue": "Resources",
"continue": "gapcontinue||"
},
"warnings": {
"main": {
"*": "Subscribe to the mediawiki-api-announce mailing list at <https://lists.wikimedia.org/mailman/listinfo/mediawiki-api-announce> for notice of API deprecations and breaking changes."
},
"revisions": {
"*": "Because \"rvslots\" was not specified, a legacy format has been used for the output. This format is deprecated, and in the future the new format will always be used."
}
},
"query": {
"pages": {
"56": {
"pageid": 56,
"ns": 0,
"title": "Reference Instructions",
"revisions": [
{
"contentformat": "text/x-wiki",
"contentmodel": "wikitext",
"*": "{|\n|+ style=\"caption-side:bottom;\"|'''Sample Reference Instruction Sheets'''\n|[[File:Ref001CoverPage.png|250px|link=]] [[File:Ref001Page2.png|250px|link=]] [[File:Ref001Page3.png|250px|link=]]\n|}\n\nReference Instruction sheets can be downloaded from the table below. Instruction sheets are provided in PDF format for convenience and should be able to be viewed on nearly all platforms with a suitable PDF viewer application.\n\n== Track Components ==\n{| class=\"wikitable\"\n|-\n! scope=\"col\" style=\"width: 8%;\" |Sheet ID\n! scope=\"col\" style=\"width: 20%;\" |Preview\n! scope=\"col\" style=\"width: 57%;\" |Description\n! scope=\"col\" style=\"width: 5%;\" |Pages\n! scope=\"col\" style=\"width: 5%;\" |Rev\n! scope=\"col\" style=\"width: 5%;\" |Pieces\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''001'''\n| rowspan=\"2\"| [[File:001BallastedStraightPennLUG.png|160px|link=]]\n| '''Ballasted Straight Track (PennLUG variation)'''<br/> Instructions to ballast a single full straight track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Instructions for the baseplate substrate can be found in reference sheets 002 and 003. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 45\n|-\n|[http://l-gauge.org/downloads/Ref001BallastStraightPennLUGRevA.pdf Download Ref Sheet 001 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''002'''\n| rowspan=\"2\" | [[File:002BallastBaseplate1632.png|160px|link=]]\n| '''Ballasted Straight Track Baseplates (16x32)'''<br/>Instructions to make a substrate for straight ballasted track on a 16x32 baseplate. The baseplate colour as well as other items can be substituted as desired.\n| rowspan=\"2\" style=\"text-align: center;\" | 1\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 19\n|-\n|[http://l-gauge.org/downloads/Ref002BallastStraightBase16x32RevA.pdf Download Ref Sheet 002 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''003'''\n| rowspan=\"2\" | [[File:003BallastBaseplate1616.png|160px|link=]]\n| '''Ballasted Straight Track Baseplates (16x16)'''<br/> Instructions to make a substrate for straight ballasted track on a 16x16 baseplate. The baseplate colour as well as other items can be substituted as desired.\n| rowspan=\"2\" style=\"text-align: center;\" | 1\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 35\n|-\n|[http://l-gauge.org/downloads/Ref003BallastStraightBase16x16RevA.pdf Download Ref Sheet 003 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''004'''\n| rowspan=\"2\" | [[File:004BallastedR40Curve.png|160px|link=]]\n| '''Ballasted R40 Curve Track (PennLUG variation)'''<br/> Instructions to ballast a single R40 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Instructions for the baseplate substrate can be found in reference sheet 005. \n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 62\n|-\n|[http://l-gauge.org/downloads/Ref004BallastR40CurveRevA.pdf Download Ref Sheet 004 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''005'''\n| rowspan=\"2\" | [[File:005BallastedR40FullCurve.png|160px|link=]]\n| '''Ballasted R40 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R40 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 22\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 245\n|-\n|[http://l-gauge.org/downloads/Ref005BallastR40CurveBase.pdf Download Ref Sheet 005 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''006'''\n| rowspan=\"2\" | [[File:006BallastedR56Curve.png|160px|link=]]\n| '''Ballasted R56 Curve Track (PennLUG variation)'''<br/> Instructions to ballast a single ME Models R56 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.\n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 70\n|-\n|[http://l-gauge.org/downloads/Ref006BallastR56CurveRevA.pdf Download Ref Sheet 006 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''007'''\n| rowspan=\"2\" | [[File:007BallastedR72Curve.png|160px|link=]]\n| '''Ballasted R72 Curve Track (PennLUG variation)'''<br/> Instructions to ballast a single ME Models R72 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.\n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 86\n|-\n|[http://l-gauge.org/downloads/Ref007BallastR72CurveRevA.pdf Download Ref Sheet 007 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''008'''\n| rowspan=\"2\" | [[File:008BallastedR88Curve.png|160px|link=]]\n| '''Ballasted R88 Curve Track (PennLUG variation)'''<br/> Instructions to ballast a single ME Models R88 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.\n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 66\n|-\n|[http://l-gauge.org/downloads/Ref008BallastR88CurveRevA.pdf Download Ref Sheet 008 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''009'''\n| rowspan=\"2\" | [[File:009BallastedR104Curve.png|160px|link=]]\n| '''Ballasted R104 Curve Track (PennLUG variation)'''<br/> Instructions to ballast a single ME Models R104 curve track element using the ballasting style first adopted by PennLUG. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. Ballasting method design contributed by Anthony Sava.\n| rowspan=\"2\" style=\"text-align: center;\" | 11\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 87\n|-\n|[http://l-gauge.org/downloads/Ref009BallastR104CurveRevA.pdf Download Ref Sheet 009 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''010'''\n| rowspan=\"2\" | [[File:R56BallastCurve.png|170px|link=]]\n| '''Ballasted R56 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R56 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 21\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 332\n|-\n|[http://l-gauge.org/downloads/Ref010BallastR56BaseplatesRevA.pdf Download Ref Sheet 010 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''011'''\n| rowspan=\"2\" | [[File:R72BallastCurve.png|180px|link=]]\n| '''Ballasted R72 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R72 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 22\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 428\n|-\n|[http://l-gauge.org/downloads/Ref011BallastR72BaseplatesRevA.pdf Download Ref Sheet 011 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''012'''\n| rowspan=\"2\" | [[File:R88BallastBase.png|190px|link=]]\n| '''Ballasted R88 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R88 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 25\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 437\n|-\n|[http://l-gauge.org/downloads/Ref012BallastR88BaseplatesRevA.pdf Download Ref Sheet 012 Rev A]\n|-\n| rowspan=\"4\" style=\"text-align: center;\" | '''013'''\n| rowspan=\"4\" | [[File:R104BallastBase.png|200px|link=]]\n| '''Ballasted R104 Curve Track Baseplates'''<br/> Instructions to make a baseplate substrate for a quarter circle R104 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"4\" style=\"text-align: center;\" | 9\n| rowspan=\"4\" style=\"text-align: center;\" | B\n| rowspan=\"4\" style=\"text-align: center;\" | 520\n|-\n|[http://l-gauge.org/downloads/Ref013BallastR104BaseplatesRevA.pdf Download Ref Sheet 013 Rev A]\n|-\n|[http://l-gauge.org/downloads/Ref013BallastR104BaseRevB.pdf Download Ref Sheet 013 Rev B - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref013BallastR104BaseDarkRevB.pdf Download Ref Sheet 013 Rev B - Dark Mode]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''014'''\n| rowspan=\"2\" | [[File:Ref014BallastSwitchLeft.png|190px|link=]]\n| '''Ballasted Left Switch (even ties/sleepers)'''<br/> Instructions to make a ballasted left-hand track switch including the baseplate substrate. This variation has ties/sleepers located at even stud intervals. Instructions for odd stud intervals are contained in another reference sheet. Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 015. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 20\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 277\n|-\n|[http://l-gauge.org/downloads/Ref014BallastSwitchLeftEvenRevA.pdf Download Ref Sheet 014 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''015'''\n| rowspan=\"2\" | [[File:CompleteLeftSwitchEvenWithReturn.png|190px|link=]]\n| '''Ballasted Left Switch Return Curve'''<br/> Instructions to make a ballasted parallel return curve from a left-hand track switch. Instructions for the corresponding left switch can be found in sheet 014. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 63\n|-\n|[http://l-gauge.org/downloads/Ref015BallastedLeftReturnCurveRevA.pdf Download Ref Sheet 015 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''016'''\n| rowspan=\"2\" | [[File:RightSwitchEven.png|190px|link=]]\n| '''Ballasted Right Switch (even ties/sleepers)'''<br/> Instructions to make a ballasted right-hand track switch including the baseplate substrate. This variation has ties/sleepers located at even stud intervals. Instructions for odd stud intervals are contained in another reference sheet. Instructions for the baseplate substrate for the corresponding parallel return curve can be found in sheet 017. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 20\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 278\n|-\n|[http://l-gauge.org/downloads/Ref016BallastSwitchRightEvenRevA.pdf Download Ref Sheet 016 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''017'''\n| rowspan=\"2\" | [[File:CompleteRightSwitchEvenWithReturn.png|190px|link=]]\n| '''Ballasted Right Switch Return Curve'''<br/> Instructions to make a ballasted parallel return curve from a right-hand track switch. Instructions for the corresponding left switch can be found in sheet 016. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 63\n|-\n|[http://l-gauge.org/downloads/Ref017BallastRightReturnCurveRevA.pdf Download Ref Sheet 017 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''018'''\n| rowspan=\"2\" | [[File:Ref018Image.png|190px|link=]]\n| '''Ballasted R120 Curve Track (PennLUG variation) *** Deprecated: please see Ref 023 instead ***'''<br/> Instructions to make a baseplate substrate for a quarter circle R120 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | B\n| rowspan=\"2\" style=\"text-align: center;\" | 110\n|-\n|[http://l-gauge.org/downloads/Ref018BallastR120CurveRevB.pdf Download Ref Sheet 018 Rev B]\n|-\n| rowspan=\"3\" style=\"text-align: center;\" | '''019'''\n| rowspan=\"3\" | [[File: t019BallastedR56Curve.png|200px|link=]]\n| '''Ballasted R56 Curve Track'''<br/>Instructions to ballast a single R56 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BlueBrixx 103352, BrickTracks R56PFDBG8, TrixBrix R56, and Fx Bricks 8856. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. \n| rowspan=\"3\" style=\"text-align: center;\" | 8\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 87\n|-\n|[http://l-gauge.org/downloads/Ref019BallastR56CurveRevA.pdf Download Ref Sheet 019 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref019BallastR56CurveDarkRevA.pdf Download Ref Sheet 019 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''020'''\n| rowspan=\"3\" | [[File: t020BallastedR72Curve.png|200px|link=]]\n| '''Ballasted R72 Curve Track'''<br/> Instructions to ballast a single Fx Bricks brand R72 curve track element (Fx Track product 8872) using the PennLUG ballasting style. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. \n| rowspan=\"3\" style=\"text-align: center;\" | 6\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 100\n|-\n|[http://l-gauge.org/downloads/Ref020BallastR72CurveRevA.pdf Download Ref Sheet 020 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref020BallastR72CurveDarkRevA.pdf Download Ref Sheet 020 Rev A - Dark Mode]\n|-\n| rowspan=\"3\" style=\"text-align: center;\" | '''021'''\n| rowspan=\"3\" | [[File: t021BallastedR88Curve.png|200px|link=]]\n| '''Ballasted R88 Curve Track'''<br/>Instructions to ballast a single R88 curve track element using the PennLUG ballasting style. This ballast method is compatible with: TrixBrix R88, and Fx Bricks 8888. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. \n| rowspan=\"3\" style=\"text-align: center;\" | 7\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 57\n|-\n|[http://l-gauge.org/downloads/Ref021BallastR88CurveRevA.pdf Download Ref Sheet 021 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref021BallastR88CurveDarkRevA.pdf Download Ref Sheet 021 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''022'''\n| rowspan=\"3\" | [[File: t022BallastedR104Curve.png|200px|link=]]\n| '''Ballasted R104 Curve Track'''<br/>Instructions to ballast a single R104 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BrickTracks R104PFDBG8, TrixBrix R104, and Fx Bricks 8904. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. \n| rowspan=\"3\" style=\"text-align: center;\" | 6\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 72\n|-\n|[http://l-gauge.org/downloads/Ref022BallastR104CurveRevA.pdf Download Ref Sheet 022 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref022BallastR104CurveDarkRevA.pdf Download Ref Sheet 022 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''023'''\n| rowspan=\"3\" | [[File: t023BallastedR120Curve.png|200px|link=]]\n| '''Ballasted R120 Curve Track'''<br/> Instructions to ballast a single R120 curve track element using the PennLUG ballasting style. This ballast method is compatible with: BrickTracks R120PFDBG8 and Fx Bricks 8920. This finished track item is designed to mount on to a baseplate substrate with plates and tiles to secure the track section. \n| rowspan=\"3\" style=\"text-align: center;\" | 7\n| rowspan=\"3\" style=\"text-align: center;\" | B\n| rowspan=\"3\" style=\"text-align: center;\" | 98\n|-\n|[http://l-gauge.org/downloads/Ref023BallastR120CurveRevB.pdf Download Ref Sheet 023 Rev B - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref023BallastR120CurveDarkRevB.pdf Download Ref Sheet 023 Rev B - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''024'''\n| rowspan=\"3\" | [[File: R120BallastedBaseThumb.png|200px|link=]]\n| '''Ballasted R120 Curve Track Baseplates'''<br/>Instructions to make a baseplate substrate for a quarter circle R120 ballasted curve track. Part quantities can be multiplied as necessary to build a half or full circle. The baseplate colour as well as other items can be substituted as desired. \n| rowspan=\"3\" style=\"text-align: center;\" | 10\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 586\n|-\n|[http://l-gauge.org/downloads/Ref024BallastR120BaseRevA.pdf Download Ref Sheet 024 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref024BallastR120BaseDarkRevA.pdf Download Ref Sheet 024 Rev A - Dark Mode]\n|-\n\n|-\n|}\n\n== Bogies / Trucks / Wheels ==\n\n{| class=\"wikitable\"\n|-\n! scope=\"col\" style=\"width: 8%;\" |Sheet ID\n! scope=\"col\" style=\"width: 20%;\" |Preview\n! scope=\"col\" style=\"width: 57%;\" |Description\n! scope=\"col\" style=\"width: 5%;\" |Pages\n! scope=\"col\" style=\"width: 5%;\" |Rev\n! scope=\"col\" style=\"width: 5%;\" |Pieces\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''100'''\n| rowspan=\"2\" | [[File:Ref100.png|190px|link=]]\n| '''AAR 50 Ton Freight Truck'''<br/> Instructions to make a North American AAR 50 ton freight truck/bogie. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Cale Leiphart and Dan Aubin for input on this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | D\n| rowspan=\"2\" style=\"text-align: center;\" | 51\n|-\n|[http://l-gauge.org/downloads/Ref100AAR50TonTruckRevD.pdf Download Ref Sheet 100 Rev D]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''101'''\n| rowspan=\"2\" | [[File:Ref101.png|190px|link=]]\n| '''AAR Barber S-2 / ASF A-3 Freight Truck'''<br/> Instructions to make a North American 50 ton Barber S-2 or ASF A-3 freight truck/bogie. This freight truck depicts the solid axle bearing type with its distinctive journal boxes. This design of solid axle truck was introduced in the 1940s and were discontinued in 1966. All solid axle trucks were banned from service in 1980. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Cale Leiphart and Josh Sanders for input on this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 58\n|-\n|[http://l-gauge.org/downloads/Ref101BarberASFTruckRevA.pdf Download Ref Sheet 101 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''102'''\n| rowspan=\"2\" | [[File:Ref102.png|190px|link=]]\n| '''AAR 70 Ton Roller Bearing Freight Truck'''<br/> Instructions to make a North American 70 ton roller bearing freight truck/bogie. Since the discontinuation of solid axle trucks starting in 1966, all modern era freight cars use roller bearing axle trucks. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Cale Leiphart and Josh Sanders for input on this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 54\n|-\n|[http://l-gauge.org/downloads/Ref102RollerBearingTruckRevA.pdf Download Ref Sheet 102 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''103'''\n| rowspan=\"2\" | [[File:Ref103.png|230px|link=]]\n| '''Osgood Bradley Passenger Coach Truck'''<br/> Instructions to make a North American Osgood Bradley lightweight passenger coach truck/bogie. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Matt Csenge and Vinnie Fusca for input on this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 73\n|-\n|[http://l-gauge.org/downloads/Ref103OsgoodBradleyTruckRevA.pdf Download Ref Sheet 103 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''104'''\n| rowspan=\"2\" | [[File:Ref104.png|230px|link=]]\n| '''3-Axle Heavyweight Passenger Coach Truck'''<br/> Instructions to make a North American 3-axle heavyweight passenger coach truck/bogie. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. The centre axle must have free lateral movement of at least \u00b12mm in order to negotiate curves and switches. This can be achieved by cutting the brass axle bearing shorter than the outer fixed axle bearings. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Nate Brill, Matt Csenge and Vinnie Fusca for input on this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 61\n|-\n|[http://l-gauge.org/downloads/Ref104Heavyweight3AxleTruckRevA.pdf Download Ref Sheet 104 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''105'''\n| rowspan=\"2\" | [[File:Ref105Image.png|220px|link=]]\n| '''Sambre et Meuse European Freight Bogie'''<br/> Instructions to make a European freight bogie manufactured by Sambre et Meuse of France. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Ronald Vallenduuk for this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 54\n|-\n|[http://l-gauge.org/downloads/Ref105SambreEtMeuseBogieRevA.pdf Download Ref Sheet 105 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''106'''\n| rowspan=\"2\" | [[File:Ref106Image.png|220px|link=]]\n| '''Minden Deutz MD-36 European Passenger Bogie'''<br/> Instructions to make a MD-36 European passenger bogie manufactured by Minden Deutz. This truck design requires the use of non-LEGO\u00ae brand brass tubes which are used to mount the train axle wheels. Suitable brass tubes can be obtained from [http://www.ksmetals.com/index.html K&S Metals] (P/N 8127 or 9821). The train wheel assemblies can be either the older or newer variety (P/N 2878c01 or 2878c02); however the newer variety requires a new brass axle to be cut from 0.081\" diameter brass rod ([http://www.ksmetals.com/index.html K&S Metals] P/N 8168). Credit to Ronald Vallenduuk for this design. \n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | B\n| rowspan=\"2\" style=\"text-align: center;\" | 78\n|-\n|[http://l-gauge.org/downloads/Ref106MindenDeutz36BogieRevB.pdf Download Ref Sheet 106 Rev B]\n|-\n\n|}\n\n== MILS Train Modules ==\n{| class=\"wikitable\"\n|-\n! scope=\"col\" style=\"width: 8%;\" |Sheet ID\n! scope=\"col\" style=\"width: 20%;\" |Preview\n! scope=\"col\" style=\"width: 57%;\" |Description\n! scope=\"col\" style=\"width: 5%;\" |Pages\n! scope=\"col\" style=\"width: 5%;\" |Rev\n! scope=\"col\" style=\"width: 5%;\" |Pieces\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''200'''\n| rowspan=\"2\"| [[File:Ref200Image.png|160px|link=]]\n| '''MILS Basic Terrain Module (BTM) Base for Single Track (16 x 32)'''<br/> Instructions to build a MILS compatible mounting base for ballasted straight single track. Instructions for the ballasted straight track sections can be found in reference sheet 001. \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 100\n|-\n|[http://l-gauge.org/downloads/Ref200MILSBTMSingleRevA.pdf Download Ref Sheet 200 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''201'''\n| rowspan=\"2\"| [[File:Ref201Image.png|160px|link=]]\n| '''MILS Basic Terrain Module (BTM) Base for Double Track (32 x 32)'''<br/> Instructions to build a MILS compatible mounting base for ballasted straight double track. Instructions for the ballasted straight track sections can be found in reference sheet 001. \n| rowspan=\"2\" style=\"text-align: center;\" | 8\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 175\n|-\n|[http://l-gauge.org/downloads/Ref201MILSBTMDoubleRevA.pdf Download Ref Sheet 201 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''202'''\n| rowspan=\"2\"| [[File:Ref202Image.png|220px|link=]]\n| '''MILS Track Elevation Transition Set 3x (16 x 32)'''<br/> Instructions to build a set of 3 modules which act as both a functional and cosmetic transition between a MILS layout domain and a baseplate/tabletop domain. This transition provides a mounting base for ballasted straight track along a smooth nominal gradient of 1 plate/16 studs. Instructions for the ballasted straight track sections can be found in reference sheet 001. \n| rowspan=\"2\" style=\"text-align: center;\" | 13\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 205\n|-\n|[http://l-gauge.org/downloads/Ref202MILSTrackTransitionSetRevA.pdf Download Ref Sheet 202 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''203'''\n| rowspan=\"2\"| [[File:Ref203Image.png|180px|link=]]\n| '''MILS Single Track Level Crossing (16 x 32)'''<br/> Instructions to build a single track level/grade crossing compatible with the MILS Single Track BTM base module (Ref Sheet 200). \n| rowspan=\"2\" style=\"text-align: center;\" | 8\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 118\n|-\n|[http://l-gauge.org/downloads/Ref203MILSLevelCrossingSingleRevA.pdf Download Ref Sheet 203 Rev A]\n|-\n| rowspan=\"2\" style=\"text-align: center;\" | '''204'''\n| rowspan=\"2\"| [[File:Ref204Image.png|180px|link=]]\n| '''MILS Double Track Level Crossing (32 x 32)'''<br/> Instructions to build a double track level/grade crossing compatible with the MILS Double Track BTM base module (Ref Sheet 201). \n| rowspan=\"2\" style=\"text-align: center;\" | 14\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 260\n|-\n|[http://l-gauge.org/downloads/Ref204MILSLevelCrossingDoubleRevA.pdf Download Ref Sheet 204 Rev A]\n|-\n|}\n\n== MILS MultiRoad Modules ==\n\n[[File:MultiRoadCatalog3.png|800px|link=]]\n\n{| class=\"wikitable\"\n|-\n! scope=\"col\" style=\"width: 8%;\" |Sheet ID\n! scope=\"col\" style=\"width: 20%;\" |Preview\n! scope=\"col\" style=\"width: 57%;\" |Description\n! scope=\"col\" style=\"width: 5%;\" |Pages\n! scope=\"col\" style=\"width: 5%;\" |Rev\n! scope=\"col\" style=\"width: 5%;\" |Pieces\n|-\n\n| colspan=\"6\" | '''Road Module Bases''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''300'''\n| rowspan=\"2\"| [[File:Ref300Image.png|200px|link=]]\n| '''MILS MultiRoad Straight Road BTM Base 32'''<br/> Instructions to build a MILS compatible mounting base for a 32 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM). \n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 108\n|-\n|[http://l-gauge.org/downloads/Ref300MultiRoadStraightBase32RevA.pdf Download Ref Sheet 300 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''301'''\n| rowspan=\"2\"| [[File:Ref301Image.png| 200px |link=]]\n| '''MILS MultiRoad Straight Road City Base 32'''<br/> Instructions to build a MILS compatible mounting base for a 32 stud long straight road section with city sidewalks. \n| rowspan=\"2\" style=\"text-align: center;\" | 7\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 192\n|-\n|[http://l-gauge.org/downloads/Ref301MultiRoadStraightCity32RevA.pdf Download Ref Sheet 301 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''302'''\n| rowspan=\"2\"| [[File:Ref302Image.png| 200px |link=]]\n| '''MILS MultiRoad Straight Road BTM Base 16'''<br/> Instructions to build a MILS compatible mounting base for a 16 stud long straight road section compatible with adjacent Basic Terrain Modules (BTM). \n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 65\n|-\n|[http://l-gauge.org/downloads/Ref302MultiRoadStraightBTM16RevA.pdf Download Ref Sheet 302 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''303'''\n| rowspan=\"2\"| [[File:Ref303Image.png| 200px |link=]]\n| '''MILS MultiRoad Straight Road City Base 16'''<br/> Instructions to build a MILS compatible mounting base for a 16 stud long straight road section with city sidewalks. \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 107\n|-\n|[http://l-gauge.org/downloads/Ref303MultiRoadStraightCityBase16RevA.pdf Download Ref Sheet 303 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''304'''\n| rowspan=\"2\"| [[File:Ref304Image.png| 200px |link=]]\n| '''MILS MultiRoad T Junction Road BTM Base'''<br/> Instructions to build a MILS compatible mounting base for a T junction road section compatible with adjacent Basic Terrain Modules (BTM). \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 104\n|-\n|[http://l-gauge.org/downloads/Ref304MultiRoadJunctionBTMBaseRevA.pdf Download Ref Sheet 304 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''305'''\n| rowspan=\"2\"| [[File:Ref305Image.png| 200px |link=]]\n| '''MILS MultiRoad T Junction Road City Base'''<br/> Instructions to build a MILS compatible mounting base for a T junction road section with city sidewalks. \n| rowspan=\"2\" style=\"text-align: center;\" | 7\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 154\n|-\n|[http://l-gauge.org/downloads/Ref305MultiRoadTJunctionCityBaseRevA.pdf Download Ref Sheet 305 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''306'''\n| rowspan=\"2\"| [[File:Ref306Image.png| 200px |link=]]\n| '''MILS MultiRoad X Junction Road BTM Base'''<br/> Instructions to build a MILS compatible mounting base for a X junction road section compatible with adjacent Basic Terrain Modules (BTM). \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 100\n|-\n|[http://l-gauge.org/downloads/Ref306MultiRoadXJunctionBTMBaseRevA.pdf Download Ref Sheet 306 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''307'''\n| rowspan=\"2\"| [[File:Ref307Image.png| 200px |link=]]\n| '''MILS MultiRoad X Junction Road City Base'''<br/> Instructions to build a MILS compatible mounting base for a X junction road section with city sidewalks. \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 116\n|-\n|[http://l-gauge.org/downloads/Ref307MultiRoadXJunctionCityBaseRevA.pdf Download Ref Sheet 307 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''308'''\n| rowspan=\"2\"| [[File:Ref308Image.png| 200px |link=]]\n| '''MILS MultiRoad Cobblestone Road 32'''<br/> Instructions to build a MILS compatible cobblestone road surface on a specialized 32 x 32 base. The sidewalks and road dimensions are compatible with MultiRoad City modules. Thanks to Ludo Soete for contributing these instructions.\n| rowspan=\"2\" style=\"text-align: center;\" | 11\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 1317\n|-\n|[http://l-gauge.org/downloads/Ref308MultiRoadCobbleStone32RevA.pdf Download Ref Sheet 308 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''309'''\n| rowspan=\"2\"| [[File:Ref309Image.png| 200px |link=]]\n| '''MILS MultiRoad Modular Building Adapter Base 32'''<br/>Instructions to build a MILS compatible mounting base to seamlessly integrate 32 x 32 LEGO\u00ae Modular Buildings into a MILS layout using MultiRoad City bases. \n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 129\n|-\n|[http://l-gauge.org/downloads/Ref309MultiRoadModularAdapter32RevA.pdf Download Ref Sheet 309 Rev A]\n|-\n\n| colspan=\"6\" | '''Roadway Lane Modules''' \n|-\n\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''310'''\n| rowspan=\"2\"| [[File:Ref310Image.png| 200px |link=]]\n| '''MILS MultiRoad Left Lane 32'''<br/> Instructions to build a 32 stud left lane section for a MultiRoad base module. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 45\n|-\n|[http://l-gauge.org/downloads/Ref310MultiRoadLeftLane32RevA.pdf Download Ref Sheet 310 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''311'''\n| rowspan=\"2\"| [[File:Ref311Image.png| 200px |link=]]\n| '''MILS MultiRoad Right Lane 32'''<br/> Instructions to build a 32 stud right lane section for a MultiRoad base module. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 37\n|-\n|[http://l-gauge.org/downloads/Ref311MultiRoadRightLane32RevA.pdf Download Ref Sheet 311 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''312'''\n| rowspan=\"2\"| [[File:Ref312Image.png| 200px |link=]]\n| '''MILS MultiRoad Left Lane 16'''<br/> Instructions to build a 16 stud left lane section for a MultiRoad base module. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 26\n|-\n|[http://l-gauge.org/downloads/Ref312MultiRoadLeftLane16RevA.pdf Download Ref Sheet 312 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''313'''\n| rowspan=\"2\"| [[File:Ref313Image.png| 200px |link=]]\n| '''MILS MultiRoad Right Lane 16'''<br/> Instructions to build a 16 stud right lane section for a MultiRoad base module. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 18\n|-\n|[http://l-gauge.org/downloads/Ref313MultiRoadRightLane16.pdf Download Ref Sheet 313 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''314'''\n| rowspan=\"2\"| [[File:Ref314Image.png| 200px |link=]]\n| '''MILS MultiRoad Left Crosswalk 32'''<br/> Instructions to build a 32 stud left lane section which includes a pedestrian crossing for a MultiRoad base module. \n| rowspan=\"2\" style=\"text-align: center;\" | 9\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 58\n|-\n|[http://l-gauge.org/downloads/Ref314MultiRoadLeftCombo32.pdf Download Ref Sheet 314 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''315'''\n| rowspan=\"2\"| [[File:Ref315Image.png| 200px |link=]]\n| '''MILS MultiRoad Right Crosswalk 32'''<br/> Instructions to build a 32 stud right lane section which includes a pedestrian crossing for a MultiRoad base module. \n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 52\n|-\n|[http://l-gauge.org/downloads/Ref315MultiRoadRightCombo32RevA.pdf Download Ref Sheet 315 Rev A]\n|-\n\n| colspan=\"6\" | '''Roadway Stripes and Markings''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''319'''\n| rowspan=\"2\"| [[File:Ref319Image.png| 200px |link=]]\n| '''MILS MultiRoad T Junction Crosswalk'''<br/> Instructions to build a T junction road segment with a crosswalk. This can be used with any of the T and X junction road sections. This segment mounts to either a left or right lane module in the same way as a line marking section does. \n| rowspan=\"2\" style=\"text-align: center;\" | 4\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 72\n|-\n|[http://l-gauge.org/downloads/Ref319MultiRoadTJunctionCrosswalkRevA.pdf Download Ref Sheet 319 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''320'''\n| rowspan=\"2\"| [[File:Ref320Image.png| 200px |link=]]\n| '''MILS MultiRoad Junction Road Segment'''<br/> Instructions to build a junction road segment which can be used with any of the T and X junction road sections. This segment mounts to either a left or right lane module in the same way as a line marking section does. \n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 90\n|-\n|[http://l-gauge.org/downloads/Ref320MultiRoadJunctionSegmentRevA.pdf Download Ref Sheet 320 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''321'''\n| rowspan=\"2\"| [[File:Ref321Image.png| 200px |link=]]\n| '''MILS MultiRoad Solid White Line 32'''<br/> Instructions to build a 32 stud solid white line marking which can be mounted to either the left, centre or right lane positions. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 22\n|-\n|[http://l-gauge.org/downloads/Ref321MultiRoadSolidWhiteStripe32RevA.pdf Download Ref Sheet 321 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''322'''\n| rowspan=\"2\"| [[File:Ref322Image.png|160px|link=]]\n| '''MILS MultiRoad Solid White Line 16'''<br/> Instructions to build a 16 stud solid white line marking which can be mounted to either the left, centre or right lane positions. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 12\n|-\n|[http://l-gauge.org/downloads/Ref322MultiRoadSolidWhiteStripe16RevA.pdf Download Ref Sheet 322 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''323'''\n| rowspan=\"2\"| [[File:Ref323Image.png| 200px |link=]]\n| '''MILS MultiRoad Dashed White Line 32'''<br/> Instructions to build a 32 stud dashed white line marking which can be mounted to either the left, centre or right lane positions. \n| rowspan=\"2\" style=\"text-align: center;\" | 3\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 27\n|-\n|[http://l-gauge.org/downloads/Ref323MultiRoadDashedWhiteLine32RevA.pdf Download Ref Sheet 323 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''324'''\n| rowspan=\"2\"| [[File:Ref324Image.png|160px|link=]]\n| '''MILS MultiRoad Dashed White Line 16'''<br/> Instructions to build a 16 stud dashed white line marking which can be mounted to either the left, centre or right lane positions. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 15\n|-\n|[http://l-gauge.org/downloads/Ref324MultiRoadDashedWhiteLine16RevA.pdf Download Ref Sheet 324 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''325'''\n| rowspan=\"2\"| [[File:Ref325Image.png| 200px |link=]]\n| '''MILS MultiRoad Double Yellow Line 32'''<br/> Instructions to build a 32 stud double yellow line marking which can be mounted to either the left, centre or right lane positions. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 23\n|-\n|[http://l-gauge.org/downloads/Ref325MultiRoadSolidDoubleYellow32RevA.pdf Download Ref Sheet 325 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''326'''\n| rowspan=\"2\"| [[File:Ref326Image.png|160px|link=]]\n| '''MILS MultiRoad Double Yellow Line 16'''<br/> Instructions to build a 16 stud double yellow line marking which can be mounted to either the left, centre or right lane positions. \n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 13\n|-\n|[http://l-gauge.org/downloads/Ref326MultiRoadDoubleYellow16RevA.pdf Download Ref Sheet 326 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''328'''\n| rowspan=\"2\"| [[File:Ref328Image.png|200px|link=]]\n| '''MILS MultiRoad X Junction Left Lane'''<br/> Instructions to build the left lane side of a X junction with pedestrian crosswalks on all 4 routes of the junction. Combine with sheet 329 to make a complete junction.\n| rowspan=\"2\" style=\"text-align: center;\" | 11\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 177\n|-\n|[http://l-gauge.org/downloads/Ref328MultiRoadXJunctionLeftLaneRevA.pdf Download Ref Sheet 328 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''329'''\n| rowspan=\"2\"| [[File:Ref329Image.png|200px|link=]]\n| '''MILS MultiRoad X Junction Right Lane'''<br/> Instructions to build the right lane side of a X junction with pedestrian crosswalks on all 4 routes of the junction. Combine with sheet 328 to make a complete junction.\n| rowspan=\"2\" style=\"text-align: center;\" | 8\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 139\n|-\n|[http://l-gauge.org/downloads/Ref329MultiRoadXJunctionRightLaneRevA.pdf Download Ref Sheet 329 Rev A]\n|-\n\n| colspan=\"6\" | '''Roadway Entrances and Parking''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''330'''\n| rowspan=\"2\"| [[File:Ref330Image.png|200px|link=]]\n| '''MILS MultiRoad T Laneway Entrance'''<br/> Instructions to build a laneway or driveway entrance off of a main road. The lane entrance can be used to transition to a parking lot, a driveway to a building or a minor roadway. Instructions generously contributed by Ludo Soete.\n| rowspan=\"2\" style=\"text-align: center;\" | 8\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 213\n|-\n|[http://l-gauge.org/downloads/Ref330MultiRoadLanewayEntryRevA.pdf Download Ref Sheet 330 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''331'''\n| rowspan=\"2\"| [[File:Ref331Image.png|180px|link=]]\n| '''MILS MultiRoad Parking Lot Left Side Markings'''<br/> Instructions to build a modular parking lot section with left hand separator markings. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete.\n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 208\n|-\n|[http://l-gauge.org/downloads/Ref331MultiRoadLeftParkingSpaceRevA.pdf Download Ref Sheet 331 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''332'''\n| rowspan=\"2\"| [[File:Ref332Image.png|180px|link=]]\n| '''MILS MultiRoad Parking Lot Right Side Markings'''<br/> Instructions to build a modular parking lot section with right hand separator markings. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete.\n| rowspan=\"2\" style=\"text-align: center;\" | 5\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 208\n|-\n|[http://l-gauge.org/downloads/Ref332MultiRoadRightParkingSpaceRevA.pdf Download Ref Sheet 332 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''333'''\n| rowspan=\"2\"| [[File:Ref333Image.png|180px|link=]]\n| '''MILS MultiRoad Parking Lot Left with Disabled Space'''<br/> Instructions to build a modular parking lot section with left hand separator markings and a dedicated space for disabled parking. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete.\n| rowspan=\"2\" style=\"text-align: center;\" | 7\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 220\n|-\n|[http://l-gauge.org/downloads/Ref333MultiRoadParkingLeftDisabledRevA.pdf Download Ref Sheet 333 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''334'''\n| rowspan=\"2\"| [[File:Ref334Image.png|180px|link=]]\n| '''MILS MultiRoad Parking Lot Right with Disabled Space'''<br/> Instructions to build a modular parking lot section with right hand separator markings and a dedicated space for disabled parking. Combine multiple modules to make a parking lot of a desired size. This module can be oriented either horizontally or vertically with respect to the entrance to the main road. Modules can also be stacked for multiple rows or columns within a parking lot. Instructions generously contributed by Ludo Soete.\n| rowspan=\"2\" style=\"text-align: center;\" | 7\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 220\n|-\n|[http://l-gauge.org/downloads/Ref334MultiRoadParkingRightDisabledRevA.pdf Download Ref Sheet 334 Rev A]\n|-\n\n| colspan=\"6\" | '''Modular Walkway with Decorative Feature Inserts''' \n|-\n\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''335'''\n| rowspan=\"3\"| [[File:Ref335Image.png|200px|link=]]\n| '''MILS MultiRoad Walkway Base 16x32'''<br/> Instructions to build a modular walkway base section with two open spaces to insert a modular flowerbed, fountain, or other decorative feature. Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 12\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 230\n|-\n|[http://l-gauge.org/downloads/Ref335MultiRoadWalkwayBaseRevA.pdf Download Ref Sheet 335 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref335MultiRoadWalkwayBaseDarkRevA.pdf Download Ref Sheet 335 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''336'''\n| rowspan=\"3\"| [[File:Ref336Image.png|135px|link=]]\n| '''MILS MultiRoad Flower Bed Module'''<br/> Instructions to build a modular flower bed module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 2\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 23\n|-\n|[http://l-gauge.org/downloads/Ref336MultiFlowerBedRevA.pdf Download Ref Sheet 336 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref336MultiFlowerBedDarkRevA.pdf Download Ref Sheet 336 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''337'''\n| rowspan=\"3\"| [[File:Ref337Image.png|135px|link=]]\n| '''MILS MultiRoad Fountain Module'''<br/> Instructions to build a modular fountain module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 5\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 90\n|-\n|[http://l-gauge.org/downloads/Ref337MultiFountainRevA.pdf Download Ref Sheet 337 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref337MultiFountainDarkRevA.pdf Download Ref Sheet 337 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''338'''\n| rowspan=\"3\"| [[File:Ref338Image.png|135px|link=]]\n| '''MILS MultiRoad Tree Bed Module'''<br/> Instructions to build a modular tree bed module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 3\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 34\n|-\n|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedRevA.pdf Download Ref Sheet 338 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedDarkRevA.pdf Download Ref Sheet 338 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''339'''\n| rowspan=\"3\"| [[File:Ref339Image.png|180px|link=]]\n| '''MILS MultiRoad Walkway Base 16x16'''<br/> Instructions to build a modular walkway base section with one open space to insert a modular flowerbed, fountain, or other decorative feature. Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 9\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 132\n|-\n|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedRevA.pdf Download Ref Sheet 339 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref338MultiRoadTreeBedDarkRevA.pdf Download Ref Sheet 339 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''340'''\n| rowspan=\"3\"| [[File:Ref340Image.png|135px|link=]]\n| '''MILS MultiRoad Walkway Plain Module'''<br/> Instructions to build a plain walkway module to insert in a walkway base section (335 or 339). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 2\n| rowspan=\"3\" style=\"text-align: center;\" | A\n| rowspan=\"3\" style=\"text-align: center;\" | 33\n|-\n|[http://l-gauge.org/downloads/Ref340MultiRoadWalkwayModuleRevA.pdf Download Ref Sheet 340 Rev A - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref340MultiRoadWalkwayModuleDarkRevA.pdf Download Ref Sheet 340 Rev A - Dark Mode]\n|-\n\n| rowspan=\"3\" style=\"text-align: center;\" | '''341'''\n| rowspan=\"3\"| [[File:Ref341Image.png|95px|link=]]\n| '''MILS MultiRoad Walkway Statue Module'''<br/> Instructions to build a statue which can be inserted into the tree bed module (338). Combine multiple modules to make a public space of a desired size. Instructions generously contributed by Ludo Soete.\n| rowspan=\"3\" style=\"text-align: center;\" | 3\n| rowspan=\"3\" style=\"text-align: center;\" | B\n| rowspan=\"3\" style=\"text-align: center;\" | 46\n|-\n|[http://l-gauge.org/downloads/Ref341MultiRoadStatueModuleRevB.pdf Download Ref Sheet 341 Rev B - Light Mode]\n|-\n|[http://l-gauge.org/downloads/Ref341MultiRoadStatueModuleDarkRevB.pdf Download Ref Sheet 341 Rev B - Dark Mode]\n|-\n\n\n|}\n\n== ViaTrack System Components ==\n\n[[File:ViaTrackCatalog3.png|900px]]\n\n{| class=\"wikitable\"\n|-\n! scope=\"col\" style=\"width: 8%;\" |Sheet ID\n! scope=\"col\" style=\"width: 20%;\" |Preview\n! scope=\"col\" style=\"width: 57%;\" |Description\n! scope=\"col\" style=\"width: 5%;\" |Pages\n! scope=\"col\" style=\"width: 5%;\" |Rev\n! scope=\"col\" style=\"width: 5%;\" |Pieces\n|-\n\n| colspan=\"6\" | '''Track Modules''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''410'''\n| rowspan=\"2\"| [[File:Ref410Image.png|200px|link=]]\n| '''ViaTrack Ballasted Concrete Tie/Sleeper Track'''<br/> Instructions to build a typical ballasted concrete tie/sleeper track section. This track assembly can be directly mounted to the track frame module Ref 440.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 54\n|-\n|[http://l-gauge.org/downloads/Ref410ViaTrackBallastedTrackRevA.pdf Download Ref Sheet 410 Rev A]\n|-\n\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''411'''\n| rowspan=\"2\"| [[File:Ref411Image.png|200px|link=]]\n| '''ViaTrack Flat Slab Concrete Track'''<br/> Instructions to build a solid slab concrete track assembly. This assembly is designed to fit the track mounting base Ref 421. The combined assembly can then be mounted to the track frame module Ref 440.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 37\n|-\n|[http://l-gauge.org/downloads/Ref411ViaTrackFlatSlabTrackRevA.pdf Download Ref Sheet 411 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''412'''\n| rowspan=\"2\"| [[File:Ref412Image.png|200px|link=]]\n| '''ViaTrack Open Slab Concrete Track'''<br/> Instructions to build an open frame slab concrete track assembly. This assembly is designed to fit the track mounting base Ref 422 or Ref 423. The combined assembly can then be mounted to the track frame module Ref 440.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 60\n|-\n|[http://l-gauge.org/downloads/Ref412ViaTrackOpenFrameTrackRevA.pdf Download Ref Sheet 412 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''421'''\n| rowspan=\"2\"| [[File:Ref421Image.png|200px|link=]]\n| '''ViaTrack Flat Slab Track Base'''<br/> Instructions to build a mounting base for the flat slab concrete track assembly Ref 411. The combined assembly can be mounted to the track frame module Ref 440.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 48\n|-\n|[http://l-gauge.org/downloads/Ref421ViaTrackFlatSlabTrackBaseRevA.pdf Download Ref Sheet 421 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''422'''\n| rowspan=\"2\"| [[File:Ref422Image.png|200px|link=]]\n| '''ViaTrack Open Frame Track Base Concrete'''<br/> Instructions to build a mounting base for the open frame concrete track assembly Ref 412. The combined assembly can be mounted to the track frame module Ref 440.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 53\n|-\n|[http://l-gauge.org/downloads/Ref422ViaTrackOpenFrameBaseConcreteRevA.pdf Download Ref Sheet 422 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''423'''\n| rowspan=\"2\"| [[File:Ref423Image.png|200px|link=]]\n| '''ViaTrack Open Frame Track Base Ballasted'''<br/> Instructions to build a mounting base for the open frame concrete track assembly Ref 412. The combined assembly can be mounted to the track frame module Ref 440.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 53\n|-\n|[http://l-gauge.org/downloads/Ref423ViaTrackOpenFrameBaseBallastRevA.pdf Download Ref Sheet 423 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''440'''\n| rowspan=\"2\"| [[File:Ref440ImageB.png|200px|link=]]\n| '''ViaTrack Mounting Frame for Double Track'''<br/> Instructions to build a mounting frame which is used to support track sections, cosmetic track borders and clip-in wall sections. The mounting frame can be freely mounted to a supporting viaduct structure below.\n| rowspan=\"2\" style=\"text-align: center;\" | 6\n| rowspan=\"2\" style=\"text-align: center;\" | B\n| rowspan=\"2\" style=\"text-align: center;\" | 178\n|-\n|[http://l-gauge.org/downloads/Ref440ViaTrackTrackFrameRevB.pdf Download Ref Sheet 440 Rev B]\n|-\n\n| colspan=\"6\" | '''Track Border Panels''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''450'''\n| rowspan=\"2\"| [[File:Ref450Image.png|200px|link=]]\n| '''ViaTrack Concrete Track Border'''<br/> Instructions to build a concrete track border panel (3 x 32).\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 24\n|-\n|[http://l-gauge.org/downloads/Ref450ViaTrackConcreteTrackBorderRevA.pdf Download Ref Sheet 450 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''451'''\n| rowspan=\"2\"| [[File:Ref451Image.png|200px|link=]]\n| '''ViaTrack Concrete Track Centre'''<br/> Instructions to build a centre concrete track border panel (8 x 16).\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 13\n|-\n|[http://l-gauge.org/downloads/Ref451ViaTrackConcreteTrackCentreRevA.pdf Download Ref Sheet 451 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''452'''\n| rowspan=\"2\"| [[File:Ref452Image.png|200px|link=]]\n| '''ViaTrack Ballast Track Border'''<br/> Instructions to build a ballasted track border panel (3 x 32).\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 23\n|-\n|[http://l-gauge.org/downloads/Ref452ViaTrackBallastTrackBorderRevA.pdf Download Ref Sheet 452 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''453'''\n| rowspan=\"2\"| [[File:Ref453Image.png|200px|link=]]\n| '''ViaTrack Ballasted Track Centre'''<br/> Instructions to build a centre ballasted track border panel (8 x 16).\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 14\n|-\n|[http://l-gauge.org/downloads/Ref453ViaTrackBallastCentreRevA.pdf Download Ref Sheet 453 Rev A]\n|-\n\n| colspan=\"6\" | '''Clip-in Cosmetic Wall Modules''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''460'''\n| rowspan=\"2\"| [[File:Ref460Image.png|200px|link=]]\n| '''ViaTrack Concrete Panelled Wall Section'''<br/> Instructions to build a concrete panelled wall section. This wall assembly can be clipped to either side of the track frame Ref 440 assembly.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 33\n|-\n|[http://l-gauge.org/downloads/Ref460ViaTrackConcretePanelWallRevA.pdf Download Ref Sheet 460 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''461'''\n| rowspan=\"2\"| [[File:Ref461Image.png|200px|link=]]\n| '''ViaTrack Open Girder Wall Section'''<br/> Instructions to build a open girder wall section. This wall assembly can be clipped to either side of the track frame Ref 440 assembly.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 23\n|-\n|[http://l-gauge.org/downloads/Ref461ViaTrackOpenGirderWallRevA.pdf Download Ref Sheet 461 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''463'''\n| rowspan=\"2\"| [[File:Ref463Image.png|200px|link=]]\n| '''ViaTrack Girder Bridge Sides'''<br/> Instructions to build cosmetic girder bridge side walls designed to clip to either side of the track frame Ref 440 assembly. This bridge assembly can be customized by building in different colours or by substituting or removing the hazard strip.\n| rowspan=\"2\" style=\"text-align: center;\" | 13\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 170\n|-\n|[http://l-gauge.org/downloads/Ref463ViaTrackGirderBridgeSideRevA.pdf Download Ref Sheet 463 Rev A]\n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''464'''\n| rowspan=\"2\"| [[File:Ref464Image.png|200px|link=]]\n| '''ViaTrack Short Concrete Panelled Wall Section'''<br/> Instructions to build a short concrete panelled wall section. This wall assembly can be clipped to either side of the track frame Ref 440 assembly.\n| rowspan=\"2\" style=\"text-align: center;\" | 2\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 28\n|-\n|[http://l-gauge.org/downloads/Ref464ViaTrackShortConcretePanelWallRevA.pdf Download Ref Sheet 464 Rev A]\n|-\n\n| colspan=\"6\" | '''Viaduct Structures''' \n|-\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''470'''\n| rowspan=\"2\"| [[File:Ref470Image.png|200px|link=]]\n| '''ViaTrack Poured Concrete Viaduct'''<br/> Instructions to build a poured concrete viaduct pier. This viaduct section is designed to support a track mounting frame above. \n| rowspan=\"2\" style=\"text-align: center;\" | 12\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 316\n|-\n|[http://l-gauge.org/downloads/Ref470ViaTrackPouredConcreteViaductRevA.pdf Download Ref Sheet 470 Rev A]\n|-\n\n\n| rowspan=\"2\" style=\"text-align: center;\" | '''471'''\n| rowspan=\"2\"| [[File:Ref471Image.png|200px|link=]]\n| '''ViaTrack Precast Concrete Viaduct'''<br/> Instructions to build a typical open-frame pre-cast concrete viaduct. This viaduct section is designed to support a track mounting frame above. The side facing 2x2 tile elements can be removed to add trackside accessories such as overhead line gantries, signals, lights, signs, etc.\n| rowspan=\"2\" style=\"text-align: center;\" | 16\n| rowspan=\"2\" style=\"text-align: center;\" | A\n| rowspan=\"2\" style=\"text-align: center;\" | 346\n|-\n|[http://l-gauge.org/downloads/Ref471ViaTrackPrecastConcreteViaductRevA.pdf Download Ref Sheet 471 Rev A]\n|-\n|}\n\n\n[[Category:Resources]]\n[[Category:Instuctions]]"
}
]
},
"43": {
"pageid": 43,
"ns": 0,
"title": "Reference Track Configurations",
"revisions": [
{
"contentformat": "text/x-wiki",
"contentmodel": "wikitext",
"*": "The reference track configurations shown below can be useful for layout planning purposes or for just gaining greater insight into the LEGO\u00ae track system geometry. The configurations shown are all intended to be built using standard/unmodified track products. Almost all configurations conform to the conventions of 16-stud parallel track separation and nominally aligning to an 8-stud or 16-stud grid interval. \n\nThe track diagrams are illustrated in schematic form for easy interpretation. All diagrams have a superimposed 8-stud grid for interpretation of scale and for recognizing baseplate boundaries. Straight sections of track typically use the \"standard\" length 16-stud section shown as \"1x\"; these can represent LEGO\u00ae brand 9V or RC straights or the ME Models full straight. Some diagrams show \"1/2\" and \"1/4\" length straight sections representing the ME Models half straight and a single LEGO\u00ae flex track segment respectively. \n\n== Parallel Curves ==\n\nThe L-Gauge track system has 5 recognized standard radii implemented directly with available track products. These radii maintain 16-stud adjacent track centreline spacing. Complete circles are made from 16 curve track elements for the R40, R56, and R72 radii; each curve element occupying a 22.5\u00ba sector angle. Curve radii R88 and R104 are comprised of 32 curve track elements, each occupying a 11.25\u00ba sector angle.\n\n[[File:RefParallelCurves.png|288px]]\n\n== Reverse Loops ==\n\nReverse loops are a convenient method of reversing the direction of travel of a complete train. The loops are illustrated returning to an adjacent parallel track; however, they can all easily be adapted to return to a common arrival/departure track with the addition of a switch and a R40 return curve. It is not recommended to use a common arrival/departure track with 9V or metal track because of the reversal of track polarity that occurs. This can be avoided by substituting any element in the reverse loop with an equivalent plastic track element to serve as an electrical isolation gap.\n\n=== R40 Reverse Loop ===\n\n[[File:RefRevCurveR40.png|320px]]\n\n=== R56 Reverse Loop ===\n\n[[File:RefRevCurveR56.png|448px]]\n\n=== R72 Reverse Loop ===\n\n[[File:RefRevCurveR72.png|545px]]\n\n=== R88 Reverse Loop ===\n\n[[File:RefRevCurveR88.png|673px]]\n\n== S-Bends ==\n\nS-bends are a useful track configuration to achieve a lateral shift of centreline or to introduce an aesthetic alternative to tracks following strictly orthogonal alignment. S-bends are characterized by their lateral offset (shift of centreline) and transition length (distance required to perform lateral shift). Most of the S-bends presented here conform to 8-stud grid interval alignment; however, a few are aligned to a less conventional 4-stud grid interval.\n\n=== Lateral Offset: 16 Studs / 8 Stud Grid ===\n\n'''Lateral centreline offset:''' 16 studs\n'''Transition length:''' 104 studs\n\n[[File:RefSBend16.png|306px]]\n\n=== Lateral Offset: 32 Studs / 8 Stud Grid ===\n\n'''Lateral centreline offset:''' 32 studs\n'''Transition length:''' 96 studs\n\n[[File:RefSBend32.png|306px]]\n\n=== Lateral Offset: 64 Studs / 8 Stud Grid ===\n\n'''Lateral centreline offset:''' 64 studs\n'''Transition length:''' 144 studs\n\n[[File:RefSBend64.png|387px]]\n\n=== Lateral Offset: 52 Studs / 4 Stud Grid ===\n\n'''Lateral centreline offset:''' 52 studs\n'''Transition length:''' 144 studs\n\n[[File:RefSBend52.png|384px]]\n\n=== Lateral Offset: 92 Studs / 4 Stud Grid ===\n\n'''Lateral centreline offset:''' 92 studs\n'''Transition length:''' 192 studs\n\n[[File:RefSBend92.png|481px]]\n\n=== Lateral Offset: 104 Studs / 8 Stud Grid ===\n\n'''Lateral centreline offset:''' 104 studs\n'''Transition length:''' 176 studs\n\n[[File:RefSBend104.png|450px]]\n\n== Crossovers ==\n\nCrossover junctions are a very common and useful configuration seen on real prototype railways. Typically, a crossover will be placed between two adjacent parallel tracks. Unfortunately, due to the geometric design of the LEGO\u00ae switch, crossover track configurations cannot be implemented between conventional 16-stud separated parallel running lines. Crossovers can only be implemented between parallel tracks separated by 32-studs. This can be achieved in two ways shown below using either two R40 curves or a single full straight track between the switches. Crossovers with 16-stud centreline separation can be made by modifying the LEGO\u00ae switch; however, that is an Expert topic requiring physical cutting and modification of the switch.\n\n[[File:RefCrossovers.png|290px]]\n\n== Return Curves ==\n\nReturn curves are typically used to make parallel offset sidings adjacent to a running line. Using the 5 available curve radii, it is possible to make several offset intervals that are grid-aligned. \n\n[[File:RefReturnCurves.png|385px]]\n\n== Diagonal Track ==\n\n=== 22.5\u00ba Diagonal Track ===\n\n[[File:RefDiagTrack22.png|578px]]\n\n=== 45\u00ba Diagonal Track ===\n\n[[File:RefDiagTrack45.png|704px]]\n\n== Junctions ==\n\n=== Y-Junctions ===\n\n[[File:RefYJunctions.png|480px]]\n\n=== Junction Diamonds ===\n\n[[File:RefJunctionCrossing.png|609px]]\n\n== Yard Sidings ==\n\n=== Grid Aligned Yard Ladder ===\n\n[[File:RefYardLadder1.png|673px]]\n\n=== Compact Non-Aligned Yard Ladder ===\n\n[[File:RefYardLadder2.png|673px]]\n\n=== Grid Aligned Diagonal Yard Ladder ===\n\n[[File:RefYardDiag.png|1138px]]\n\n[[Category:L-Gauge Standard]]\n[[Category:Track]]"
}
]
}
}
}
}